Can confirm the zinwell in a CS setup with GW + bf430 + season
Please report stb/cam compatability with whitey and any other whitey issues here:
topfield 3000cipro/freecam: works, no issues, auto updates, card runs a bit "hot", fan keeps heat under control
topfield 3200IR/softcam2.15 works, no isssues, auto updates runs warmish
uec 720ixaurora/softcam2.10 works, occasional black screen, reboot fixes, auto updates, runs very warm but not quite hot
zinwell zdx7000/softcam DOES NOT work, invalid card error, but reported works with CS client card
dreamax dt470 DOES NOT work, unknown card
Look Here -> |
Can confirm the zinwell in a CS setup with GW + bf430 + season
dont say linux if i wanted it id install it
Humax 5400 runs warm no issues
Space 4000 work great too for cheap irdeto 2 box
Chieflets
correction space 480
Chieflets
with the 5400's it is all dependent on the firmware.I have tested with most of the TOH and some did ok others did not.
Also the 1.05 is ok yet the 1.03 i tested did not like it nor the payed sub card
dont say linux if i wanted it id install it
im running a dreamsat x600 and very good response to card, also no overheating.
nokia 9200 works ok
Opentel i4000
Strong 5654X - Only through a Cam
Humax 5400, 5410, Ace - As FandTM666 said, appears to be firmware dependant.
My Dreamax DT470 works fine. Purchased second hand, I have no idea if it has been modified.
I alway assumed that the dreammax dt470 wasn't compatiable with a white pointer.
You sure it works with whitey i know it works with sub card.
Chieflets
Topfield TF3200IR
DSD720iIX Aurora STB
UEC910 is okay as long as its latest version card.
Not a single model dreambox works with internal slot.
Topfield 3000cipro works with allcammed Goldstar firmware, gets to same temp as aaurora card.
1 dreamax now working with whitey and "sky" firmware after NIT rescan, other dreamax with identical firmware refuses to recognise card, go figure
Will a standard Humax 5400Z work with no problems with a whitey???
I have cut a hole in the reader for heat to escape and will be adding a fan.
It is a standard unit with nothing done to it. Factory firmware.
Cheers
Min.
Blown Humax 5400Z, Strong SRT 4658X, Strong 4663X and DM 518.
I dont know, I haven`t used to unit since to old system went down.
How do I check it? Tell me and I`ll plug it in and let you know.
Cheers
Blown Humax 5400Z, Strong SRT 4658X, Strong 4663X and DM 518.
Sorry, just had a quick look. The only thing I could find with a ZIC is
ZIC 1.06.04
Blown Humax 5400Z, Strong SRT 4658X, Strong 4663X and DM 518.
Bookmarks