Flashing Irdeto 900264 CI Module

**ruben** · 08-01-08, 09:30 PM

Anyone have the files thanks to flash the 900264 CI module? Download update files link doesn't work for this cam on (site is now down alltogether today).

It currently has Freecam 2-019 installed which is not working for either my aurora card or whitey. Have followed all the recommended settings in menu and still no good, so hoping that a flash to 2-020 will work.

Have another one of these 900264 cams with 4.7se loaded and also not working with either card.

Cheers.

**Keepleft** · 09-01-08, 06:20 AM

Card in contacts up, EMU to OFF, Choose irdeto, DEBUG - OFF, TPS - OFF.

Do you have the SCM Loader? (IF you want to run standard Irdeto Revision 1.11003B, *I have this file* which offers nagging pop-up windows, but sometimes leaves genuine SelecTV card asleep and not updated correctly, version works fine with Austar/Aurora etc). I'd go the freecam 2.20 bin file simply to avoid nagging pop-ups! Didn't think 4.7SE would work.

I do have the freecam files btw, various. PM me a workable email addy.

* 2.06B cams - for reader interest - are best done by member Cwispy, they involve physical work.

**cwispy** · 09-01-08, 07:36 AM

There is no point flashing it to 2-020 if its not working with the aurora card now. Does the cam detect the cards when they are inserted? Are you able to try the cam in more than one receiver at all?

**ruben** · 09-01-08, 09:01 AM

Originally Posted by Keepleft

Card in contacts up, EMU to OFF, Choose irdeto, DEBUG - OFF, TPS - OFF.

Do you have the SCM Loader? (IF you want to run standard Irdeto Revision 1.11003B, *I have this file* which offers nagging pop-up windows, but sometimes leaves genuine SelecTV card asleep and not updated correctly, version works fine with Austar/Aurora etc). I'd go the freecam 2.20 bin file simply to avoid nagging pop-ups! Didn't think 4.7SE would work.

I do have the freecam files btw, various. PM me a workable email addy.

* 2.06B cams - for reader interest - are best done by member Cwispy, they involve physical work.

Hi,
Thanks Keepleft. Have those settings mentioned but my 2-019 does not have TPS setting.
I don't have SCM loader and thanks for the file offer. Will PM you my email.
Cheers.

**ruben** · 09-01-08, 09:05 AM

Originally Posted by cwispy

There is no point flashing it to 2-020 if its not working with the aurora card now. Does the cam detect the cards when they are inserted? Are you able to try the cam in more than one receiver at all?

OK cwispy as I'm aware you are quite experienced with these. The cam does detect aurora card but not whitey. Have tried in both Strong & Humax receivers for similar results. Cheers.

**cwispy** · 09-01-08, 09:37 AM

I assume that the whitey does work? What does the cam say when you insert the whitey, just "invalid card" or nothing at all?

**ruben** · 09-01-08, 09:42 AM

Whitey works fine in cardslot but says nothing in camslot. Aurora card says 'scrambled channel' in camslot but also works fine in cardslot.

**cwispy** · 09-01-08, 10:46 AM

What are the options in the cam set to? Its starting to sound like the emu is still turned on in the goodies menu?

**ruben** · 09-01-08, 10:59 AM

Originally Posted by cwispy

What are the options in the cam set to? Its starting to sound like the emu is still turned on in the goodies menu?

In goodies menu, I have 3 variables: Debug, ECM and Emu. Debug is Off, ECM is set to Irdeto and Emu is Off.

**cwispy** · 09-01-08, 11:03 AM

Ok. It sounds like maybe the flash has screwed up. will get you directly to the files you were looking for in the first place. However if the flash is indeed messed up, the flash might fail.

**ruben** · 09-01-08, 11:12 AM

Originally Posted by cwispy

Ok. It sounds like maybe the flash has screwed up. will get you directly to the files you were looking for in the first place. However if the flash is indeed messed up, the flash might fail.

Yeah, I'm coming to realize that about the flash has probably screwed up. It hasn't got TPS in the goodies menu, could that be contributing to problem?

That is that link I mentioned earlier cwispy where the downloads for the 900264 cam are not working.

I have been trying for past couple of days to download upgrade pack and ver 2.020. Any chance you have them? Cheers.

**cwispy** · 09-01-08, 11:55 AM

Sorry I misunderstood what you meant in the first post about the lefdata site. You can grab a copy of the freecam file from here

**ruben** · 09-01-08, 12:17 PM

Thanks cwispy.

**ruben** · 28-01-08, 02:08 AM

Well after finally getting my hands on a vintage laptop which was designed exclusively to run on Windows 98, I have managed to successfully re-flash my 900264 cam to freecam ver 2-020. Seems from my readings that only some laptops will accept the cam drivers OK for their PCMCIA slot and some won't.

Now this cam works with both aurora and whitey cards. Yippeee!!

**BillyGoat** · 28-01-08, 04:35 AM

Well done.

**Rocket** · 28-01-08, 08:58 AM

Well done ruben.

I flashed my freecam yesterday and all apears to be well. I followed these instructions on the lefdata site but not sure what step 10 is saying. As there are no on screen instructions once the display turns green.

Did I miss a step??

0. Download the upgrade Pack and the version you want.

1. Unzip all files into a directory of you choice (e.g. C:\CAM)

2. Copy the CIPHYSICAL.DLL %windir%\system\ and %windir%\system32\ directory

3. Edit ird106.ini and change the binary=*.bin entry to the file you want to
install

4. Copy ird106.ini to your Windows directory %windir%\

5. If you run Win95 OCR2 use irdeto95.inf or Win98 use irdeto98.inf (ONLY ONE OF
TWO DELETE OTHER)
If you run WinMe, WinNT, Win2k or WinXP it won't work!!!!!

6. Shut Down Laptop

7. Restarting Laptop (WITH THE CAM ON THE PCMCIA SLOT)

8. When it asks you for a driver directory point to unzip directory (e.g.
C:\CAM)

9. Start ird106.exe. Press the start button. When the display turns greens,
you're all set.

10.Follow the on screen instructionsStart the MS-DOS command line.

Rocket

**ruben** · 28-01-08, 09:39 AM

Originally Posted by BillyGoat

Well done.

Thanks BillyGoat.

**ruben** · 28-01-08, 09:45 AM

Originally Posted by Rocket

Well done ruben.

I flashed my freecam yesterday and all apears to be well. I followed these instructions on the lefdata site but not sure what step 10 is saying. As there are no on screen instructions once the display turns green.

Did I miss a step??

0. Download the upgrade Pack and the version you want.

1. Unzip all files into a directory of you choice (e.g. C:\CAM)

2. Copy the CIPHYSICAL.DLL %windir%\system\ and %windir%\system32\ directory

3. Edit ird106.ini and change the binary=*.bin entry to the file you want to
install

4. Copy ird106.ini to your Windows directory %windir%\

5. If you run Win95 OCR2 use irdeto95.inf or Win98 use irdeto98.inf (ONLY ONE OF
TWO DELETE OTHER)
If you run WinMe, WinNT, Win2k or WinXP it won't work!!!!!

6. Shut Down Laptop

7. Restarting Laptop (WITH THE CAM ON THE PCMCIA SLOT)

8. When it asks you for a driver directory point to unzip directory (e.g.
C:\CAM)

9. Start ird106.exe. Press the start button. When the display turns greens,
you're all set.

10.Follow the on screen instructionsStart the MS-DOS command line.

Rocket

Hi Rocket,

It all ended at Step 9 for me. There was no Step 10. Didn't get that in my instructions, which are the same as yours except for 10 and also in your step 2 I had CIPHYSICAL.DLL in just the C:\CAM folder, not in system & system32.

Only had to put 'ird106.ini' in Windows directory, as in your Step 4.

Cheers.