Why wouldnt u just run both setups in the 1 NewCS.
I take it u have 2 cards ?
Cheers James9813
hey guys,
ive finally made the change from windows to linux. so far so good, ive been able to successfully run and install linux as an OS and server and get newcs working and sharing 100%. The only problem now is that after many hours of googling and searching i dont know how to have 2 simultaneous newcs running. In windows i just had two seperate files and icons, but now i dont know where to start using terminal as it would have the same file names. Oh where to from now??
Look Here -> |
Why wouldnt u just run both setups in the 1 NewCS.
I take it u have 2 cards ?
Cheers James9813
yeh i got 2 cards and wanna share them seperately, can i put them in the same .xml? if so hows the layout
IRD2 & NDS ???
Do u want all users to have access 2 both cards ?
Let me know and i will send u a config.
Cheers James9813
ND$, split up into 2, so certain users access one card and the rest accessing the other, pretty much 2 seperate accounts you could say
Thanks heaps mate
2 ND$ Cards NewCS Setup
<readers name="Phoenix">
<device>
<name>Phoenix NDS Com1</name>
<type>phoenix</type>
<mhz>600</mhz>
<node>COM1</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<blockC0>Yes</blockC0>
<crypto-special>No</crypto-special>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>15500</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<priority>round</priority>
</device>
<device>
<name>Phoenix NDS Com2</name>
<type>phoenix</type>
<mhz>600</mhz>
<node>COM2</node>
<parity>odd</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<blockC0>Yes</blockC0>
<crypto-special>No</crypto-special>
<PTShandshake>No</PTShandshake>
<carddetect>yes</carddetect>
<newcamd_port>15550</newcamd_port>
<autosid>Yes</autosid>
<Seca-PPV>no</Seca-PPV>
<priority>round</priority>
</device>
</readers>
User Setup for Card 1 (port 15500)
<user>
<name>User</name>
<password>Password</password>
<status>access</status>
<au>off</au>
<spider>off</spider>
<sidoverride>off</sidoverride>
<readers>
<allow>Phoenix NDS Com1</allow>
</readers>
<rate>0</rate>
</user>
User Setup For Card 2 (port15550)
<user>
<name>User</name>
<password>Password</password>
<status>access</status>
<au>off</au>
<spider>off</spider>
<sidoverride>off</sidoverride>
<readers>
<allow>Phoenix NDS Com2</allow>
</readers>
<rate>0</rate>
C how u go!
best4less (11-02-10),marzi (12-02-10),theriddler_1 (18-02-10)
worked like a champ thanks mate, even got the usb card reader to work THANKS HEAPS
Good to hear mate.
Dont for get to setup your NewCS Web interface.
That way you can manage your users, Server uptime, SIDS, ECM Hits & User Errors.
NewCS XML
<httpd>
<server>
<port>6969</port>
<enabled>yes</enabled>
</server>
<user>
<name>newcs</name>
<password>newcs</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
URL for Web Interface
http:\\(yourIP) : (Port)
E.G. http:\\192.168.1.100:6969
If u setup port forwarding through your router, u then can access the web interface from any PC with a net connection. Use DYNDNS if u dont have a static IP address.
Cheers
Last edited by james9813; 12-02-10 at 09:50 AM.
So a usb smargo reader will work in linux with newcs ?
yep u just need to config the Smargo, then start NewCS.
Cheers James9813
sweet because I just ordered a smargo for a mate and was worried if usb readers were compatible with newcs.
I'd double check the compatibility of smargo and newcs if I were you
sorry my bad.
I use mine on NewCS Win XP.
Cheers
the usb card reader from satronics was just plug and play
Both readers names are NDS should one be IRD2?
read ALL the posts.
Cheers James9813
what are you using for your cache settings emm and ecm?
<cache>
<emm>20</emm>
<ecm>-1</ecm>
</cache>
what colour are your cards.
Cheers James9813
blue
Bookmarks