factory f/w? This is a factory f/w release. I always reformat the application area before doing f/w upgrade. Never had an issue doing this.
Leroy
I have upgraded my az premium plus box to 0.9.4690 and that went ok.
I am trying to upgrade to the latest f/w 0.9.4717 and when I upgrade using the usb,it starts and then I get a black screen and the box says "settings" or something like that.If I reboot I find my f/w is still 4690.
Do I have to install factory f/w?
thanks
Look Here -> |
factory f/w? This is a factory f/w release. I always reformat the application area before doing f/w upgrade. Never had an issue doing this.
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
Leroy,I will look into it tonight.
Btw what f/w are you running?
I might still be on 4466 from memory. I stopped loading the latest update as they came out as there was little difference in performance between them.
How's the blind scan? And is it finding everything and also it's speed?
Cheers.
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
i
1: do a backup first of channels etc
2: format the application area
3: do the upgrade
4: reset channels etc from backup
am currently using 0.9.4690
dont say linux if i wanted it id install it
jgarg (01-04-10)
Might pay for you to load the latest firmware, works okay.
Do as diavalo13666 has suggested
New firmware azbox-0.9.4717
Improved blindscan speed is only for the Premium Plus Box
Download
fixed flac support | fixed ogg support | fixed broken epg | improved blindscan speed| fixed recording from standbyCode:http://fw.azupd.com/azbox-0.9.4717-patch.bin
Last edited by sat 49; 01-04-10 at 06:38 PM.
1 x VU+ Duo HD Twin Tuner PVR, 2 X AZbox HD, 2 X Opticum 9500 HD, Unotelly DNS & VPN, 2 X Roku Media players, 3 X WD-TV Media Players, and some shitty Vast STB's
Garglo (15-04-10)
Try downloading azbox control center and upgrading from there thats what i always use and have no problems
Thanks guys,all working.
My only problem is that I cannot record encrypted channels.
I am using multicas and f/w 4717.
Also anyone used it with vbox positioner?I cannot get the box to go to the satellite.
It works very well with a motek with usals.
Try using MultiCAS v162D-A04I am using multicas
1 x VU+ Duo HD Twin Tuner PVR, 2 X AZbox HD, 2 X Opticum 9500 HD, Unotelly DNS & VPN, 2 X Roku Media players, 3 X WD-TV Media Players, and some shitty Vast STB's
Anyone managed to d/l latest fw 0.9.4717 when i clicked on d/l option it says it will take 3 days to d/l.
Location: Sunny Perth
I just did a format app area and loaded 4625. I stayed away from the hardware accelerated later versions as people seem to be having tuner issues.
I had to rescan all channels from scratch. Before I upraded I had no now next info since the FBO channels moved TP's even though I tried deleting and rescanning!
I tried to download the latest version but it's coming down slowly.
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
Since getting the box set up I haven't touched the application area and I have upgraded firmware through each release since 0.9.4295. I had recording issues and eventually worked out it was a HDD compatability issue in my case. Currently running 0.9.4754 without any problem.
Bookmarks