How do I clone /copy, using infinity USB unlimited

[Richard Thomas]

I am a new beginner to the game, and I am experimenting.

I have just purchased a INFINITY USB UNLIMITED card reader writer. Can anyone advise me on how to either CLONE or COPY a after-market working Gold Card, when I put the card in, it did indicate "protection", and if I went any further it would erase some data, as I dont want to stuff-up my good card, I thought I had better get some advice.

Step by Step advice would be appreciated - as I need this type of advice to eat my cornflakes.

Regards
Richard

[Dave001]

It's easy enough to do Richard.

Use GGedit or LMedit to read the HMK, HSN, ProvID(10) and PMK(10), from the working card.

Load the blank card with Ghost Gold code, then use GGedit or LMedit to load the above info to the new card.

[clint316]

goto options then to clone wizard

[Richard Thomas]

Gents ~

When I went to the clone wizard with the working card inserted the following window appeared - The CPU detected is used on multiple different cards, to determine the exact card, a full detection is needed which will erase the contents of the card,, so I just went to "cancel" as I did not want to damage my card, What should I do?

On step 3 of the clone wizard after the above a message appeared - Error - Card is code protected and cannot be cloned, next lesson thanks!

Regards
Richard

[Dave001]

Here's the stuff you asked for in your PM Richard.

GGedit is for Gold card only, LMedit works for Gold, Silver, Emerald and Fun card, try GGedit first, less settings to mess with.

GGedit:
LMedit:
Ghost Gold

I'm not familiar with your programmer, so hopefully someone else will be able to talk you through loading Ghost Gold onto the blank card.

If you have any other questions, just ask.

Dave

[weirdo]

Here's some light reading material for you Richard

[Richard Thomas]

Dave, I am having a problem to get the programs to work, as a example - when I clicked on the GGedit It appeared that the files downloaded OK ( ggedit.ini, ggedit_2_31r2.exe, install bat, readme, saxcom8.ocx) however when I double click on the exe. (hoping to see a program come up) I get (component comdlg32.ocx or one of its dependencies not correctly registered: a file missing or invalid) I have the three programs downloaded which are displayed in my computer as three books stacked together. What am I doing wrong?

[weirdo]

Dave, I am having a problem to get the programs to work, as a example - when I clicked on the GGedit It appeared that the files downloaded OK ( ggedit.ini, ggedit_2_31r2.exe, install bat, readme, saxcom8.ocx) however when I double click on the exe. (hoping to see a program come up) I get (component comdlg32.ocx or one of its dependencies not correctly registered: a file missing or invalid) I have the three programs downloaded which are displayed in my computer as three books stacked together. What am I doing wrong?

[tristen]

Dave, I am having a problem to get the programs to work, as a example - when I clicked on the GGedit It appeared that the files downloaded OK ( ggedit.ini, ggedit_2_31r2.exe, install bat, readme, saxcom8.ocx) however when I double click on the exe. (hoping to see a program come up) I get (component comdlg32.ocx or one of its dependencies not correctly registered: a file missing or invalid) I have the three programs downloaded which are displayed in my computer as three books stacked together. What am I doing wrong?

Firstly, you need to make sure that you have the *.ocx files in question. If not, they can be located on the internet using Google. Once downloaded, place them in the windows\system32 directory of Drive c:

Secondly, you will need to use the regsvr32 command to register the *.ocx files for use (in the Windows environment).

Use this syntax :

regsvr32 <Path of .ocx file>

[wipper]

Here's the stuff you asked for in your PM Richard.

GGedit is for Gold card only, LMedit works for Gold, Silver, Emerald and Fun card, try GGedit first, less settings to mess with.

GGedit:
LMedit:
Ghost Gold

I'm not familiar with your programmer, so hopefully someone else will be able to talk you through loading Ghost Gold onto the blank card.

If you have any other questions, just ask.

Dave

Hi Dave...

Those software only works in COM port not USB. This infinity uses USB Connection instead of COM

Rudi

[bigfella08]

Hi Dave...

Those software only works in COM port not USB. This infinity uses USB Connection instead of COM

Rudi

Under the tools menu within the infinity software there is an option to put the programer into VCP Mode(virtual com port)
this will then allow you to run after market software /tools as listed

[John Hoffman]

Gents ~

When I went to the clone wizard with the working card inserted the following window appeared - The CPU detected is used on multiple different cards, to determine the exact card, a full detection is needed which will erase the contents of the card,, so I just went to "cancel" as I did not want to damage my card, What should I do?

On step 3 of the clone wizard after the above a message appeared - Error - Card is code protected and cannot be cloned, next lesson thanks!

Regards
Richard

richard all you have to do is ,put gold card in slot ,click gold card on software,
goto tools click clone wizard ,and when it reads card it will tell you put blank card,press OK, if your card is protected you cant clone it,but you also cant stuff it up.ps dont pull card out until its finishe reading.
what you watchin anyway
john

[wipper]

I have a gamma card nad infinity usb unlimited...

When I try to put the card in and it not detect the card...

Anyone know how can I read the gamma card info on it ??

[Fernbay]

I have a gamma card nad infinity usb unlimited...

When I try to put the card in and it not detect the card...

Anyone know how can I read the gamma card info on it ??

You can't

You can read the basic details in many programs, such as gamma loader or even FMcard.
It will not be enough info to clone it though

The com's to/from gammas are encrypted. It can't be 'copied' as such
Your wasting your time. Forget that approach wipper.

[wipper]

Thanks Fernbay....

I just tought, how can people clone it, as I try to read the card myself using Infinity USB unlimited but the device does not recognise the CPU and the card type .....

I have using lmedit ggedit still cannot read.... look like the card is protected...

[razershaarp]

I have been through this before what are you trying to do! If your trying to clone aurora you need the older cards! Better making one yourself with a cheap goldie someone will help out! Austar and foxtel as far as i know cannot decode the keys without hi-tech equipment so good luck

[wipper]

I have been through this before what are you trying to do! If your trying to clone aurora you need the older cards! Better making one yourself with a cheap goldie someone will help out! Austar and foxtel as far as i know cannot decode the keys without hi-tech equipment so good luck

HI...
I have a gamma card for a Telkom1 it seem using irderto encryption...

Thanks

[admin]

I have using lmedit ggedit still cannot read.... look like the card is protected...

They are not designed to be used with gamma cards. They are for gold, silver, emerald cards using Ghost Gold, Silver, Emerald.