Fine here, check your cable connection, make sure thats ok....your dish hasn't moved.
Since about 9pm last night I can't get any channels on selectv,when I do a manual search it says "No(orBad)Signal".
Funny thing is when I look in Signal Level the strength is around 77% but the Quality never moves off 0%.
We didn't have any bad weather last night so I don't see how all the channels could just vanish into thin air.
If anyone could help would be very much appreciated.
Look Here -> |
Fine here, check your cable connection, make sure thats ok....your dish hasn't moved.
The cables are all connected, when I turned it off before then on again it came up with the letters DL on the stb display that stayed on for about 5 seconds, then it came up with the letters UA or OA that stays up for about 10 seconds then it went to 8888 then went blank?
The dish is on the roof of our apartment block so I can't get up there myself.I don't know how it could have moved.
What decoder are you using? It might have forgotten some settings such as LNB frequency etc.
Finally fixed it seemd to be searching on pas4 changed it to pas8 KU 12326 and now all the channels are working again.
Bookmarks