Are we talking about the FTA service on Optus D1?
anyone able to get abc qld? can get all the others but qld.
Any ideas? ta
Look Here -> |
Are we talking about the FTA service on Optus D1?
LOL I am thinking they shut down the one at Toowong where
is the others now
When you do things right, people won't be sure that you have done anything at all
rain fade? ABC QLD off D1 was the weakest one.
Just ran another blind scan of D1 on the Strong. All the ABCs work but only come up as ABC1 2&3 so I don't know which is QLD as is displayed on C1 which as we know is not really FTA, but using an Aurora card on C1 ABC Qld works fine.
D1 - ABC Freq
Qld - 12469 H
NSW - 12514 H
SA - 12532 H
NT - 12550 H
Perth - 12577 H
Vic - 12595 H
Qld (again) -12613 H
Cheers, Saintaholic
ta sainta I forgot to mention D1
will try tonight might have to point 90cm dish way down here in ACT
Saintahloic: But ABC NSW-12514 video quality on D1 is below 50%, picture is freezing but others on D1 r very good.
thanks for reading this mail, n wish u all the best of health n wealth 4 u n yr familiy
Spot on Mr electricity a little tweak and all is well
Ta
Everyone has a different setup. I actually get my D1 through a 2.4m Universal combination, so it's gonna be different to a 60cm 'High'. Skew etc. Also the Decoder is a MASSIVE difference as well. I can get D1 on 3 Decoders (Strong 4658X, Dreamax DT470 & Coship) with all showing a big diff in %.
Cheers, Saintaholic
My own experience is to use the same decoder and adjust for max %. Then check another satellite EG NSS6 on the other side and balance the best result. The % I get and all decoders is different, but consistant.
Cheers, Saintaholic
Bookmarks