Hi Guys
Can someone please tell me what is the lastest AUS map for IGO PRIMO? A link would be even better
Thanks
Last edited by bazzle; 01-10-10 at 05:53 PM.
Hi Guys
Can someone please tell me what is the lastest AUS map for IGO PRIMO? A link would be even better
Thanks
First of all a big thank you to all those of you who have posted a lot of very usefull information and hosted the software files.
Mt past GPS experiences have been with oziexplorer which I really love as it allows you to scan in your own topo maps which are great for rural area exploring. Which I have done a lot of in Cambodia and Vietnam. My other GPS experince has been with Destinator which I have not been very impressed with since version 3.75.
So I am a newbie to IGO and need a bit of help getting started. I am using a HTC touch HD. My first question would be is it better to install the progam on the Storage card or the internal memory and just have the map data on the storage card.
To start with I have tried to put it all on the storage card and I am getting the error message can not find global_cfg. I think this is probably a sys.txt problem in the folders area.
Below is my sys.txt file can you please advise me on what changes need to be made to make things work and to optimize the operation.
[device]
type=""
[folders]
app="//Storage Card/Primo"
[interface]
routepath=""
landscape=1
resolution_dir="800_480"
vga=0
mapfontscale=200
minzoom2d=50
maxzoom2d=5000000
[Rawdisplay]
HighRes =0
screen_x = 800
screen_y = 480
class = "landscape"
[gps]
port=2
baud=38400
maximise_baud=0
set_messages=0
[map]
3d_max_tiltlevel=10000
3d_max_zoomlevel = 3000
3d_min_zoomlevel=40
3d_max_zfar=2000
fake2d_max_zoomlevel = 3000
3d_zfar_horizon_ratio = 200
roadblockicon_maxzoom = 2000
2dheadup=1
sieve_mode=1
3d_scale_carmodel=1
3dcarsizemin=7000
3dcarsizemax=9000
3dcarsizemul=10000
3d_max_tiltlevel=9000
3d_default_tiltlevel=8500
3d_min_zoomlevel=20
3d_max_zoomlevel=800
[debug]
no_file_cache=0
max_memory=35000000
reserve_memory=1700000
cache=300000
[smartzoom]
minangle=0
maxangle=70
[warning]
speedcam_warning=1
warn_distances=130:500,110:450,90:300,60:230,40:12 0
overspeed_sound="!camera"
[tts]
tts_buffer=131072
announce_exit_directions=1
tts_logics=3
priority="HIGH"
always_say_road_names=1
announce_street_name=1
skip_exit_numbers=0
[camera]
minzoom=30
maxzoom=80
defaultzoom3d=50 ; this should do the trick
minangle=10
maxangle=85
defaultangle=70
angleoffset=30
[3d_config]
roadsign_lines_per_screen=15
disable_roadsign_navigation_mode=0
activated_spoken_type=speech
activated_speech="Warning, hazardous intersection ahead"
activated_min_speech_repeat_delay=-1
Look on your sys.tx, nothing wrong, you cold add some line to:
[device]
type="HTC touch HD"
[interface]
routepath="\\Storage card\\"
and in the content folder has sub folder global_cfg, inside global_cfg/global_cfg.zip
Last edited by laogia; 02-10-10 at 04:00 PM. Reason: add up
seems I was doing a little bit to much work. I was exctracting all of the zip files in the content folder. I have it going past this error message now and now it is getting stuck on the language selection.
Is ther a way to have it work in portrait mode 400*800?
zip files on content folder, you extract them some times, it's not works properly, if you device portrait mode, could try replace this line on sys.txt
[Rawdisplay]
HighRes =0
screen_x = 480
screen_y = 800
class = "portrait"
I downloaded Primo.
It loads up to voices, but does not go any further.
Anybody know what I am missing.
I have WinCe5.0...on a 7" unit and running iGo fine.
eah
Need help please????
Trying to get iGo Primo to work.?
I loaded it on a sd card.
My problem is.....it hangs in the lanquage selection.
Willl not go any further I select English and that's it???
I saw in an earlier post somone else had the same problem.
I did not see if it was resolved.?
What do I need to do?
My unit is a 7" WinCe5.0 480x234.
Please help??????
Link is dead can someone post a new link please
that would be great as i have been pulling my hair out.
...
you can send it to steve@xraychips.com
Thanks
Any fresh links everything is dead?
Also does any one have a working 480x234 resolution file download link for primo?
Thanks!
Can someone send me a link for the primo/igo8 Junction view files and where I need to put those files on my SD card please? I seem to have lost them in the upgrade
here is a link to download primo Primo 8.5.11
maps
NZ
AU
Bookmarks