you need a HSN.
Dear Gent,
I'm logged EMK by EMK logger from DM500s 24 Hrs but I don't have any card then How ot fing or know what is valid EMK (CBxxxxxx) string
Look Here -> |
you need a HSN.
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
you need the HSN from the card you are using, then you can search your logs for that HSN there is a date attached to it you use the latess one, there is a ton of information on this subject if you took the time to search for it.
Tagg
all the HSN's in the stream are VALID in the EMKs.
can you please explain what you are trying to do as it may help us to help you, to me you sound very cryptic ??,
Tagg
you may be out of you league mate
Its quiet a simple process to make a working Gamma card from scratch the steps you need to do are
1. obtain a blank Gamma card
2. log the provider stream
You have already got this far
3.obtain a legit provider card
4. send the legit provider card to a lab to have it probed to obtain HMK keys and IV_pad and HSN
5. search your logged file for the HSN CB/C3 you got from the lab.
6. write an operating system for gamma card
7. flash your card with the operating system you wrote
8. write a bin file with all the correct information
9. load the bin file to gamma card
10. step ten is the very important step of all make sure you write down each step in great detail so you can make a guide for future reference because you will forget otherwise and please make sure you don't post this guide on any public forums or tell anyone else how you did it.
11. This is the MOST IMPORTANT STEP Via PM send me and only me the detailed guide on how to make your own working AU Gamma card from scratch. this will be very valuable information and just about everyone on this forum and many other forums want to know how its done so please don't post the guide you write.
step 6. you need to give the operating system a catchy name like sellers.os
step 8. you might need to get extra help with writing the bin maybe we could get a few computer programmers and form a team and give us a name what about "Gamma team" ?
Last edited by bigboy; 18-06-10 at 11:04 AM.
ds2005 (19-06-10),Goose (19-06-10),OzBlackKnight (18-06-10)
actually you can , but I’m pretty sure you won’t. The information you need is just simply not publicly published anyway on the net in any one spot. Unless of course you’re a member of a magical "Stone Cutters" group and have an unlimited resource ( $$ ) to fund your endeavour. You’re better off just doing a bit more reading on several forums on what you need to even get at least half the information required to get it going. The one part you will have trouble finding is explained by bigboy , valid HSN , HMK’s and IV_pad and the method in which is required to write a .bin file with these details.
But when you do , add me to the PM list
oh I think "gamma team" has been aquired by a known company called "Austar" her in OZ so you'll have to go with maybe "Team Gamma"?
Last edited by theriddler_1; 18-06-10 at 01:57 PM. Reason: nonya
ds2005 (19-06-10)
bigboy (18-06-10)
oh I think "gamma team" has been aquired by a known company called "Austar" her in OZ so you'll have to go with maybe "Team Gamma"?[/QUOTE]
Dam I put a lot of thought into that name "Team Gamma" sound good tho
Anyone know some very clever computer programmers willing to spend countless hours for very little pay that have vast knowledge or the IR2 system?
Bookmarks