And you're using newcamd yeh?
Hi All,
Ok, i am setting up a dm600pvr for a mate, it has gemini 4.2 for that model and what i am trying to do is set up aur*** on it.
My problem is that i have copied over a ppua file (from my dm518) to the scce folder of the dm600 but no pics/audio, have waited overnight and today for it to kick in, but no go.
Is there something else that i need to do for this model?
***tel works with blue no problem, just no encrypted aur***.
aur*** info channel and nitv all good.
Any help/advice is greatly appreciated.
cheers
hannible
Last edited by Hannible; 25-06-10 at 10:29 PM.
Look Here -> |
And you're using newcamd yeh?
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
Did you also install the newcamd config file?
You also need to copy across the 'Keylist' file thats in your 518's scce directory.
did you copy the file across to the right folder ?
remember the folder layout is slightly different in the DM600
yep - i did copy over the keylist and ppua to the scce folder in the 600, didnt go up.
am i doing something wrong here, admittingly, i am treating the 600 as if it a 500.
cheers
hannible
Files should be in /etc/tuxbox/scce
Also, have you double checked that you are running necamd for these channels and not the deault cam like cccam?
Sorry but that's exhausted my knowledge on the subject matter. I set my 600 the same way as you did using files from my 500 so I can't understand why it doesn't work. The only difference is that I'm usi Pli Jade 2
Hannible (26-06-10)
jonc (27-06-10)
Yep - all good now.
gemini was the issue - fuc*** it off and put in PLI jade3, fired up without issues straight away after i transferred, yet again, my ppua and keylist from my 518.
Now to tell the mate gemini is a P.O.S.
thanks all.
cheers
hannible
Last edited by Hannible; 26-06-10 at 07:29 PM.
Great to hear its all sorted.
Sorry-Mods/Admin, please delete this post
Cheers
Hannible
Last edited by Hannible; 29-06-10 at 07:40 PM. Reason: Sorry - Mods/Admin please delete this post
i have setup my DM 600 to record to a 500gig NAS drive on my network and can play mpeg 2 movie.
Hi All,
Ok, now i have a new problem with this unit, it now appears newcamd wont start.
1st
Originally Posted by OSIRUS Here are the ppua 2 lines of code can you show us what is happening to the ppua file please, (getting overwritten) (do not post your real keys !!!)0602:000000:00:0001XXXXXX:aa aa aa aa aa aa aa aa0602:000000:00:00c3YYYYYY:bb bb bb bb bb bb bb bb bb bbXXXXXX is the provid aa's are the PMKYYYYYY is the HSN bb's are the HMKReinstalling the newcamd 6.10b might be a good idea too.
2nd
Originally Posted by z1gg33 ok, thought i better have a go at getting mine to workthis is all did to get mine working. (THERE IS GURU'S HERE that no sooo much more than me) so this is just what I had to do.You might have to other things, have it setup differently.MINE IS SETUP TO USE NEWCAMD ON channel WINI left my ppua file and keylist file that last worked 3months ago in /var/sccei installed newcamdi rebooted the dmi changed channel to winIT DID NOT WORKi telneted into dmi then did cd /var/bini then did psi could see that newcamd was runningi did kill XYZ (the newcamd process num)i then did ./newcamd -dI RECIVED ERRORS MESSAGES indicating that it could not read the config file and parse error:3 ppuaI then downloaded newcamd config (DOH!!! forgot to because its late) I rebooted the dmi then cd to root and repeated the steps of killing newcamd
But this is as far as i get, when i telnet into it, newcamd is not present, as if it has not started at all, as a result i get no pics, newcamd is set as default cam, and i have followed the above steps carefully, i have tried crond settings but it makes no difference.
Any ideas?
cheers
hannible
Hannible, I assume this was running fine until recently. My tip is to save your ppua file on your pc somewhere. Reimage the box.... then reinstall newcamd and ppua.
You can spend many hours trying to understand why these things happen, when the quickest way to the end sometimes is to start at the beginning.
Yep, yet again, i will try that.
These 600's suck big time.
My 518 going strong
cheers
hannible
I agree florra
I had a ppua that stopped working - took me ages - and lots of help in here
in the end it was a full file system and logs, key files couldnt grow anymore etc
so a reimage would have fixed it ..rather than the days I spent on it..
also if your ppua is going thru a windows box .. dos2unix is your friend to ensure its back in the right format
Dm500, DM5620, DM600 x2, DM7000 x1, DM7020, DM7025, DM800, VU+DUO and a partridge in a pear tree
All it takes for evil to prevail is for good men to do nothing
What other files are needed to be inserted in the scce folder on the 600, other than ppua and keylist?
cheers
hannible
Bookmarks