A huge thanks to Mick. The chip arrived today and the set is now all fixed.
Thanks Mick. Appreciate it.
What would you do if your server was stolen or failed beyond repair?
http://www.2000cn.com.au/shadowprotect.html
A huge thanks to Mick. The chip arrived today and the set is now all fixed.
What would you do if your server was stolen or failed beyond repair?
http://www.2000cn.com.au/shadowprotect.html
Hi Cwispy, Good stuff, Did you change the screen type in the service mode. I'll PM the price when I find the invoice in the mess I've got going on.
Mickstv
Yep, changed the screen settings as per the service notice. Let me know how much I owe you when you can. It sounds like you use the horizontal filing system too
What would you do if your server was stolen or failed beyond repair?
http://www.2000cn.com.au/shadowprotect.html
Hey, I've got this same TV, and having the same problems. Would I be able to get the service manual too please?
Anybody have some info on repairing the LA40R81BDX model, after the two caps have been replaced, and when powered on the relay clicks and IC1202 and IC1104 get very hot, then the supply clicks off and the cycle starts again. It has a Weltrend WT61PGS for IC1806 which I have no info on.
Lift pins 5 & 6 & power up on IC1803 surfacemount IC and see it the set will fire up that will tell you if the Eprom is at fault or you have more serious problems.
It's in the middle on the back of the tuner PWB.
edit :- Forgot to give you thisinfo when you PM'ed me.
Mickstv
Last edited by mickstv; 13-11-10 at 11:37 AM.
Thanks Mickstv, removed IC1803, powered set on and seemed to all work, the other two chips didn't get hot. The LCD stayed black during the process and couldn't get it turn on but the blue light below the Samsung logo flickered when pressing keys on the remote, and it would respond to the remote power button.
Searching found a link for another model, they had the eeprom contents to download, hxxp://www.tv.quuq.org/forum/index.php?topic=2377.15, reading the LA40 24c256 would appear to be blank, all 0xff with some 00's scattered.
Still a bit strange the last one i looked at when the eprom ic was taken out I got the on screen display up on it so it is possible you've got bigger problems than just the eprom but it is still worth trying.
In this thread you'll find a file to download in the PDF you'll find the part number of the eprom ic.
Mickstv
Hey Mick or cwispy did any of you boys do a dump of a good 24c256 (IC1803)
Just farting around with one ATM
Cheers
When you do things right, people won't be sure that you have done anything at all
Just another quick one Mick when you remnoved your whole IC1803 the set comes alive with OSD etc
as I just removed my one and she is not happy still no pic or anything
And yes the way things are looking i will love to grab the IC from you just after a few more tests
Cheers
Last edited by best4less; 22-07-11 at 05:56 PM.
When you do things right, people won't be sure that you have done anything at all
I think from memory the screen will come upto analog fuzz when the IC is removed.
The tuner board maybe shot. But fear not as I may even have a secondhand tuner pwb and I also have some secondhand power supplies.
Mick
Sweet, got a nice price for both boards so i can see if the customer wants it
When you do things right, people won't be sure that you have done anything at all
The power supply will be ok if you have changed the caps, so it will be down to the mainboard. I'll have a look and make sure I have one before we go to far ok. I'll have a look for a mainboard tomorrow morning I just can't remember whether the boards I'm thinking about are for the r81 for the 71 models.
Stick the eeprom back in and leave pins 5 and 6 disconnected and see what happens.
Mick
Thanks for the reply
Have you ever had one of those days LOL
I put the eeprom BACK TO FRONT and left pins 1 and 2 off LOL
Well i will be buggered the set turned on the way you said with snow etc ..
So when i put the eeprom in the right way all pins soldered down she is back to clicking LOL
So if you have a chip or the dump as I am, sure i have a few 24c256 sitting here from previous projects
When you do things right, people won't be sure that you have done anything at all
My records say i've got 2 so we will see. So I will look tomorrow and let you know tomorrow ok
Mick
Last edited by mickstv; 22-07-11 at 09:12 PM.
Guess what I just found. PM sent best4less
Mick
Ahh mate thanks for looking but i just stuck a blank one in it and guess what as soon as the TV boots it writes to it
The give away was when you were saying lift the pins / same as shorting i guess as it blanks / zeroes
Again Mick this is why this site is so good as there are boys that go way out of there way to help each other and you are one of them
When you do things right, people won't be sure that you have done anything at all
mickstv (23-07-11)
I wonder if the old one just needs to be cleared ?
But then again it's not worth the hassle when it comes to a customers job.
Mick
Bookmarks