Hello, i have a big problem with a P06 64mb 800x480 6,2" unit.
someday, it bricked and it dint run anymore. using this forum, I formated the flash and reupdated the firmware with the windows ce 6 english and the menu pa06 800x480 64mb fron this post.
but now this is the problem, the menu that it is in this webpage, has more optionz that the original menu of my YF unit, and of course is bigger in MB!
the problem? at first,I have 30free mb of space in the "RAM", after the update OF THE FIRMWARE , I only have 9 free mb!!
and all the programs when i try to open (IGO, etc) says:
"not enought memory avaliable". also it happens the same if I go to windows CE and try to open an util...
what i can do? where i can find a yfapp.wzd more little?
thanks
remove this post please
Last edited by Vitor_boss; 27-08-10 at 09:23 AM.
Reinstall another 'YFAPP.wzp', but now use one smaller.
Try use this menu:
Is running very fine on mine.
Last edited by Vitor_boss; 28-08-10 at 09:33 AM.
ok NoService I tried several times what was written on the 1st page of this thread, nothing just happens, I did what you told me, formatted the registry , I put the files that you posted the link to download for the FW version of my GPS but still nothing, I am stuck on the starting screen with the error message, cannot find pmp.exe , when I try to press ok the system freezes! Need your help mate!
anyone have fw update of globalsat GA-5718??? Pls share it!
Hello My Friends,
Can anyone help me to find this two firmware for a gps with wince 6.0 5 inch as the pic shows, please?
and this
Thanks for your help!!!
Albert
I did it again.
Received a new GPS from china and decided to give it a new menu.
So I did exactly what I did before but now it does not go beyond the startup-up screen.
What do I look for? Is the problem the wrong menu or the wrong OS?
I really don't remember the firmware numbers.
Thanks in advance.
John
Hi All...
My Device is 82A V4 or V6 i dont know exactly. I have downloaded the full package for ALL NEW, but now it doesnt want to start. Just black screen, no logo NOTTHING!!! I think its bricked permanently!!! It was some boot loader in it and it suppoed to be that its not the right one!!!
Pleeeeeeeeease, no service or someone....can you help me with this? is there a solution for this problem? how can i make this work??? Waitting pleasee!!!
(click telecharger for download)
EVERGROW C946, 128MB, bluetooth
ROM + SKIN
100204.4.80.61.43.E
Last edited by eses; 05-09-10 at 02:38 AM.
Please, say How I can change startup image (boot-image) for PA06?
Firmware: V.3.6.C173 (Chine), theme: IPhone.
What step do I need to do?
Thank
Above posts:::
Try asking here:
Let us know what Petrums says?
Bazzle
Still trying to get this baby back to work.
The only OS that is giving a install bar (read,erase,write) is the 82F.
All others I tried didn't do nothing.
But I am sure I've read that it was 82A when I bricked it.
It stays stuck on the 'windmill' opening screen. You can't do nothing, even turning off is disabled.
Really need some help here guy's.
hello friends , i am new here in this forum.
Saw some great recoveries from the dead devices, but i have purchased one device on ebay.It was working fine, and i remember to read the system information which said that it was YFATLAS4 and the ROMVERSION 82F.3000.......
The unit was a bit slow , so i tought i would update the firmware from the 82F firmware available in this forum - (iphone type menu).
i followed all the procedure , the update was also completed as seen in the picture,
but when it restarted then the device did not move further than the start up screen as seen i nthe picture.
Kindly help me in rectifying this problem,Thankyou to all of you in Advance.
Kindly guide me if I have done Something Wrong.
Bookmarks