raedemarkshant (26-04-14),yogleyarma (12-05-14)
raedemarkshant (26-04-14),yogleyarma (12-05-14)
Hello.
I need a firmware for dead-bricked (black screen) GPS.
SiRF Atlas V Dual-Core-Prozessor (644MHz)
high-speed 64 channel GPS receiver
ca. 10,8 cm (4,3") LCD touchscreen
Avanteq TMC module
Auto-backlight
128 Mb RAM, 4 GB resident flash
No BT, no A/V.
I didn't find any of brand firmwares online and support team is no use, but I believe that "A-Rival NAV-XEA433" is actually one of numerous Chinese clones under the brand name. Disassembly didn't give a hint, no usual YG markings on PCB or elsewhere, looked all PCB over, even under RF covers...
Anyone knows about the similar devices whose firmware may fit?
raedemarkshant (26-04-14),yogleyarma (12-05-14)
????
Last edited by bazzle01; 11-04-14 at 12:51 PM.
Have a nice day
raedemarkshant (26-04-14),yogleyarma (12-05-14)
Hello,
I am seeking the following firmware V.912C.211100.120222.128M
Could somebody please provide a link for download.
Many thanks.
raedemarkshant (26-04-14),yogleyarma (12-05-14)
Hello,
Seeking for help....
I have a China unbranded GPS device as follows :
Processor : SiRF Atlas-IV AT640 533MHZ
Ram Size : 64 MB
Flash Size : 4 GB
App Version : 091117.1827.QC21.SD
Os Version : N091028E09102800911191702
Serial : 4fbd9fc40282ed46e87 ac8f0de515d03
Using Microsoft Windows CE6.0
The existing GPS software is Papago!X3. This software works fine but with 2009 map. I cannot update the latest map because Papago now use Version X8.5 and latest. The updated map can only be used by the new software.
So can anyone help me and let me know :
1) how to install the new Papago Software Version 8.5 into my GPS unit.
2) Where can I get this software ??? I mean the cracked one.....
Thanks....
kamora (16-01-21),raedemarkshant (26-04-14),yogleyarma (12-05-14)
I have a China unbranded 5" MT 3351 GPS device as follows :
Ram Size : 64 MB
Flash Size : 4 GB
Using Microsoft Windows CE5.0
YG-912C-W6-FSJ-4G-1D-6LS-B1.1
It bricked. Press the ON button, white screen with vertical lines. Tried to put firmware on to the microsd, press the ON button, nothing happened. Also It does not connect to PC.
Please help. Thanks
raedemarkshant (26-04-14),yogleyarma (12-05-14)
Hello!This is Juscemper from Brazil.
First of all congratulations for this forum.
I am trying to fix a GPS 4,3" model 82c ver.1.2 22_12_2008 that is stucked in welcome screen.Do not access sd card by pc.It uses Atlas Sirf iii AT640.
I reset it several times but it not works.I have put a firmware Sirf Atlas iii i sd card and almost got there but stoped on the welcome screen.
The batery is not good.Is this a critical point when we are going to install some new firmware?
Could you please help me to solve this problem?
Sorry for my poor ingles.
Juscemper
raedemarkshant (26-04-14),yogleyarma (12-05-14)
yogleyarma (12-05-14)
I have 2Din chinese dvd/gps car stereo, it is stuck on logo screen, I tried to get the installer to get me details of the device but no luck, the image looks like this. How do get the device back in its original state, the radio, cd and bluetooth works fine, its the screen and gps whats stuck. I have no idea what ROM or who the manufacturer is for this device
Thanks in advance
Hello guys,
To do this, seeking the Chinese device firmware.
At power up, writes: “No SD/MMC card inserted”
managed to brick my device, i have all the content of ResidentFlash, NAND, but the device locks at loading screen. How can i restore residentflash ?
Hello everybody.
I have got this device which worked very well until a few weeks back when after a successful update of maps it forced me to delete the flash disc...
I was asked to set up again the touch screen and after that, it is stuck at the welcome screen, with a few sounds.
branded as (see the picture) but eventually made of the common (although a bit dated for this thread) components below:
- Chip GPS: Sirf Star III
- LCD: 3.5" TFT LCD Touch Screen
- 320 x 240 pixels
- 250cd
- CPU: 300Mhz
- Storage: slot SD/MMC Plus
- slot SD/MMC: 128MB, 256MB, 512MB, 1GB, (2GB)
it runs wince 4.2
picture and versions are shown here:
If I look inside, it is exactly like this one, therefore I presume that these units are substantially the same:V7 Navigation 1000 GPS, Takara GP8, MyGuide3000.
Can anybody help please?
Thanks
Last edited by McStuck; 14-06-14 at 10:23 AM.
i managed to find NK_7700_3.nb0 and Upgrade.bin for my device, but i don't know how to start the update procedure. The device is in some kind of boot freeze or boot loop
Hi all, I have one of these units
installed approx 2yrs ago without any problems. I am trying to find both firmware/software upgrade for it and also GPS map update for it, is anyone to assist?
gary
Hey all , i got one of these chinese shites
my model you can see here:
my menu was like these one:
spec:
128mb
win ce 5.0
cpu mediatek mt3351
4.3inch display
I downloaded rom by model and tryed to install without succes...
pls help!!!
video where im speak in russian and demostrating problem:
Last edited by azt1337; 02-07-14 at 06:57 AM.
I made a video also with my problem
hi all , i need firmware on that model pls add to me !!
YG-912C-W6-ABFSJ-1M-1D-AS-4LS-5LS-11.0
Win ce 5.0
MT3351
128mb
4.3inch
when i run app update my gps shutdowns or freeze on 10%
What im doing wrong?
HI everyone
I have following 5"GPS unit
main characteristic are:
5.0 Inch Touch Screen Function
Microsoft Windows CE6.0
SIRF Atlas V 600 MHZ
5.0inch 800*480 HD GPS Navigator+SirfV+128MB RAM+4GB
On my attempt to change the startup screen I succeeded to brick it,
after start I see only a white screen without any menu and other stuff
Can some one explain what version of firmware I need to use , and how to fix it?
I have downloaded from supplier site the pack for update
which contains three img files :
Changedesktopicon.img
Wince.img
WinCeApp.img
but nothing was going well with this update.
I do not know how to get sysinfo for this device.
Thanks, in advance for your help
Hi guys,
I own a AS-7608 Gold edition v3 unit and while trying to update the software using NWTDCALI.exe because the unit could see only the USB atached directly to the unit and not SD card, but it failed while was installing.
After that, i have a black image on GPS side and only Dimming and Volume OSD are shown on screen if i click them.
Somebody told me that the bootloader may be broke.
Can you please tell me if there anything that i can do to get it back alive?
Unit details from pictures i made:
GlobalSat EB-3631CX SIRF III / SN: 9ZC2AB4
NADA100206498
CHRONTEL 7026B-TF GDC 0945 N4C23
WIN CE 5.0
Thank you!
Bookmarks