Hi everyone,
Looking for a compatible and updated firmware for my chinese 2din radio.
Kind regards
----
BSP version:
AT8x0 6.0
Windows Embedded CE 6.0
117 MB RAM
ARM1136JF-S AT840
800x480 pixels, 65536 colors
----
----
I´m trying to follow your advice, but the forum 4pna.com does not exept my registration with my correct user / pw so far. It responds to my registration trial with "The answer given for the random question was incorrect."
The random question being ask in the registration form is: "Add a theme code out of the relevant archive"
However the problem is, I have no access to the archieve prior to registration. I dont even know what kind of code is meant by the aforementioned question.
Does anybody know how to break this barrier?
I still believe that your advice is very good and that I can find an answer to my problem in the a/m forum.
BTW: I allready learnt a lot about cyrillic letters. Thank you!
Problem is allready solved!
Last edited by japagoda; 30-07-15 at 01:44 PM.
Hi everyone,
Looking for a compatible and updated firmware for my chinese 2din radio.
Kind regards
----
BSP version:
AT8x0 6.0
Windows Embedded CE 6.0
117 MB RAM
ARM1136JF-S AT840
800x480 pixels, 65536 colors
----
----
I bought a china dvd / navigation and want to know if I can upgrade it somehow, because I have a few issues with it. For example the DVD player doesn't work or barely work. Also radio stations can't be stored by name only by frequency.
I can't find any mentioning of the ROM/MCU on the net. Does anybody know what kind of version this is? It's WinCE 6.0 that's sure.
I also would like to know if I can convert it to Android and if that is a good idea?
It's this one:
Last edited by Netuddki; 05-09-15 at 06:35 AM.
Hi everyone,
This is my first post.
Can you help me with a ROM firmware for this GPS (please see the image)?
I found in the later posts but i can't download it. After i download a chinese client torent and also the file that i intend to download, the speed of the transfer stay still at 0.00 kb/s. My GPS devise show only the boot image.
Thank you.
Hello.
I also made a mistake and buy a 2din Chinese car dvd. It's work properly, but... without any sound !!!
Сould someone experienced this problem?
Device info :
WINCE6
App Version : 60WIN7-T-2014-01-18
System Plat : V.YC002.200001.130913
MCU Version : ALONG-Sep 01 2014-1042
FirmwareVer : D01132152 S9b0c0060
Thank's to all!
DVD PICTURE -
Last edited by pilpel; 27-10-15 at 08:15 PM.
albertB,
Thanks for posting, but the post you replied to is 4 years old and the poster hasn't been on the site since.
First of all thank you guys and gals for all the great feedback i am trying to get through this forum asap and i am learning soooo much.
if anyone has any suggestions for me i greatly appreciate any and all help.
I purchased one of these radios to have nothing but problems. every time i use the navigation the radio resets its self!!!! i have been through trouble shooting with the manufacturer and now they have left me with 2 options. 1 return the product to China at my expense or keep the radio. i am wondering if a new firmware is the way to fix this issue or just throw it away. $87 to return isn't my idea of compromise.
here are the stats that i have found thus far
MT3360_CE60_W1350_74444
MT33XX 6.0
Windows Embedded CE 6.0
150 MB RAM
ARM176JZF-S mt33xx
800x480 pixels, 65436 colors
purchased through ebay here is a link
ALSO is there any way to switch from 24HOUR CLOCK TO 12 HOUR CLOCK???
Last edited by thegrnseed; 21-12-15 at 04:38 PM.
Need Chinese GPS Firmware for 5inch Res 480x272
MT3351C
None of the links are working hence asking.
84A、PA05、PA06、 PAO7、PA08
PA05、PA06、 PAO7、PA08/64MB/480×272
Hi guys I have been reading through many of these posts but I need some guidance if possible as I cant quite figure it out.
I have a Chinese generic 5" GPS S-700HD
128MB
WinCE6
SD card
around 2008 purchased on eBay
Was running iGO8
I do not have any other reference numbers or Firmware type etc as I cannot access the device from the device.
I have been trying to update the maps and the OS but have been unsuccessful.
This is what I have at the moment
The device boots up to the first window (after the car drawing image) which is the cross hairs and continual touching of these does nothing
or with a long button press when turning device on it goes into Boot Option 1030N-2-5G
offering these 2 choices
Start Co. adjust
Normal Lunch (Which guess is Chinese for Launch)
I can highlight each of these two choices with a quick press of the power button but when I try and then touch on the screen nothing happens and when I try and activate the Normal Launch selection by pressing the power button it pops up the car drawing again and then offers the cross hairs again????
The above is the only access I have to the device.
Only when I hook the device into the PC I can read both the SD card and the Nandflash on the device and can see the iGO8 files and folders on both.
I think I may have somehow corrupted the Firmware or OS or whatever it is called???.
Question is how do I fix this problem??
If anybody can point me in the right direction I will be very grateful as it looks like this device is otherwise useless.
Thank you in anticipation
Kind regards
AussieWayne
Last edited by AussieWayne; 10-01-16 at 10:39 PM.
Gents,
I need advice on tackling my problem as shown in the picture. I do not know the model and versions. Any takers?
I can't retrieve any info as the unit stuck here. Please help before I scrap this unit...
Last edited by kenharta; 12-01-16 at 01:28 PM.
Just for the record bazzle01 solved my problem by advising for me to use a 'pen' instead of tapping with my fingers when doing the callibrating sequence with the cross hairs. Did it twice and hey presto it booted up and now everything is as it should be.
Who would have known?????????? bazzle01 that's who!!!
A big thanks
AussieWayne
hello guy's, i need firmware for this no name chinese GPS, problem is stuck on boot screen
here some pictures and information
evergrow technology c846 v1.0a1
SiRF Atlas III AT640
Kosax (14-02-22)
Hello guy's, please i need Chinese GPS Firmware for 320x240
Skydrive
MODEL: YG-935M-SJ-6M (YG935M-V1.2)
OS: V.25M.000000.100624.64M
all the best
I have Chinese No-Brand car nav systems running Windows CE 6, application version V0.26 110401.
I moved the Launcher.exe file from the flash drive to SD card by mistake and restarted the system.
The device now shows only the first screen/picture.
I tried to make WINCE bootable SD card but did not work. I also tried to create autorun to do anything (copy/rename test file) just to see if windows is accessing the SD card but without luck.
I have backup for the launcher and application folder but I'm unable to access the drives.
I would really appreciate your help to restore the device.
Thanks,
HI, friends!
Best regards from Belarus.
I have some problems with my GPS navigator Pioneer PM-777HD.
I lost original firmware in my GPS unit after my mistake.
Now I have other firmware without Bluetooth.
Please, help me to find the original firmware to my GPS navigator.
Factory DATA of my navigator:
Rom Version: 82E.SD-3.020110217
Software Version: V4110620C
Platform ID: 0018E42009000000
Device ID: 7770000011010468
RAM: 128 MB
Flash: 4.0 GB
Present DATA of my navigator:
Rom Version: 82E.SD-3.020110217
Software Version: V1.2.11.11.04.23
Platform ID: 0018E4200900000
Device ID: 7770000011010099
RAM: 128 MB
Flash: 4.0 GB
BSP version: AVCE6EVB_Rel.1.00.5.10
AT 10X0A 6.0
Windows Embedded CE 6.0
116 MB RAM
ARM 1136JF-S AT550 (533 MHz)
800x480 pixels
I need firmware for Junsun D100 GPS 256mb ram 8gb rom
Thank you.
Hi all
@shecky90
Junsun D100
TiaiwaiT C6
1 firmware:TiaiwaiT C6
2 method :
find a card which is less than 2GB, make sure the card is empty , there is no file in the sd card . unzip the firmware to the sd card ,----turn off the device , and then insert the sd card ,keep charging , then the firmware will work automaticly
Hi lads
im looking for a rom for my china gps it is a 5" version apparently this is it as far as i can gather i have tried till my head bursts and i am still no further please help
Rom version=v.912s.710100.140.709 4g
App version
V2.8 nui20.f.sd.en
wince 6.0
if anyone could help me i would be deeply appreciated
kind regards
dave
Last edited by focus1400; 16-07-16 at 01:08 AM.
Bookmarks