-
Junior Member
- Rep Power
- 0
- Reputation
- 10
Austar IR Codes needed
I need to know if anybody knows where i can get Austar IR codes, i need to enter then in a home automation system (switchautomation, if anybody knows about it) to work with the pronto remote control.
to me it looks like when i try to learn the codes from the orignal austar remote, the code, per button, is not long enough for the automation system to work with.
just need to know where i can get a list for ir codes.
-
here is a lirc remote config for a ADB8776 from here - if thats the box you got you'll need to convert to philips pronto
hex
#
# this config file was automatically generated
# using WinLIRC 0.6.5 (LIRC 0.6.1pre3) on Mon May 18 23:49:16 2009
#
# contributed by Jamie Collins VK3JME
#
# brand: ABS
# model: 8776
# supported devices: Austar DVB-S STB Receiver
#
begin remote
name ABS_8776
bits 16
flags SPACE_ENC
eps 25
aeps 100
header 9003 4528
one 571 1670
zero 571 553
ptrail 571
repeat 9009 4504
pre_data_bits 26
pre_data 0x401DFF
gap 23038
toggle_bit_mask 0x0
begin codes
1 0x807F
2 0x40BF
3 0xC03F
4 0x20DF
5 0xA05F
6 0x609F
7 0xE01F
8 0x10EF
9 0x906F
0 0x00FF
AUDIO 0x7887
DOWN 0x38C7
EXIT 0x28D7
INFO 0xB04F
LEFT 0xA857
MENU 0x50AF
MUSIC 0x9867
MUTE 0x58A7
OK 0x6897
P+ 0x708F
P- 0xF00F
POWER 0x30CF
RCL 0xF807
RIGHT 0x48B7
TV 0xC837
TELETEXT 0x18E7
TVGUIDE 0xD02F
UP 0xB847
V+ 0x08F7
V- 0x8877
end codes
end remote
Last edited by Mysterex; 17-07-10 at 04:16 AM.
Junior Member
- Rep Power
- 0
- Reputation
- 10
i need descrete pronto codes, any idea where i can get themto austar?
eg.
0000 006D 0000 0022 00AA 00AA 0015 0040 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0040 0015 0015 0015 0040 0015 0040 0015 0040 0015 06F2
Junior Member
- Rep Power
- 201
- Reputation
- 41
Junior Member
- Rep Power
- 0
- Reputation
- 10
Thank you, thats helped big time.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks