Reply With QuoteMore info needed, What card, what cam, what server, what config ?
lets asume fox blue. id say you have two logins the same
ensure each client has a seperate (different login)
regards
Extradry
Sharing to a DM500s - picture freeze.
Hi all, I am sharing to a Dream DM500s. Each day the picture freezes and has to be fixed by a channel up a few and down. Is there a fix for this or have I done something wrong or is this just what you have to deal with? Running Jade 3 PLI Image. Thanks in advance for any help!!
| Look Here -> |
More info needed, What card, what cam, what server, what config ?
lets asume fox blue. id say you have two logins the same
ensure each client has a seperate (different login)
regards
Extradry
I concur...sounds exactly like this.Originally Posted by Extradry
Cheers
enf
The fact that there's a highway to hell and a stairway to heaven says a lot about the anticipated traffic flow.
nah, all logins different, works fine on occy. not on dream - running mgcam via newcamd. gonna try a version of cccam.
I love my DM500s and the network options on this box, but find after about 24 hours that I need to do a channel up and down to get back the sync between video and audio, This has occurred on both Aurora and selectv - although still running pli jade2 - as it just works
Worse I have had to do is reboot the box (last night) to get back selectv!
We cannot solve our problems with the same thinking we used when we created them - Albert Einstein
Disabling 'fast channel zapping' in the advanced set up should fix that.I love my DM500s and the network options on this box, but find after about 24 hours that I need to do a channel up and down to get back the sync between video and audio, This has occurred on both Aurora and selectv - although still running pli jade2 - as it just works
Worse I have had to do is reboot the box (last night) to get back selectv!
It's well known & documented
montessa, check that the boxes have different MAC's. You may need an 'init' file in VAR/ETC
Reality is an invention of my imagination.
ಠ_ಠ
[QUOTE=Fernbay;317048]Disabling 'fast channel zapping' in the advanced set up should fix that.
It's well known & documented
That maybe so I am always the last to Know thank you for this info
I agree with Fernbay, probably Mac address conflict.
is always handy to keep on your system
I use the newcamd.conf file with this...
CWS_KEEPALIVE = yes
&
mg_cfg file
(Updating box) If you have octagon it WONT keep card updated in remote server. So use this on your Dreambox.
This will send EMMs
A: { 01 }
(If any other client box that uses mgcamd use)
This will send only if cant decrypt.
A: { 02 }
Davo
I upgraded a box to PLi Jade 3 a while back and found the same thing. I actually changed back to jade2 and it seems fine now.
Nice tips also Davo.
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
Posting Permissions
Bookmarks