Results 1 to 7 of 7

Thread: Dead xCam?

  1. #1
    Junior Member
    Join Date
    Jul 2008
    Age
    56
    Posts
    45
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Rep Power
    192
    Reputation
    10

    Default Dead xCam?

    Hi

    I tried to upgrade my xcam using 'xcrypto_125_card' and a Funcard, the cam was a xcam 1.04.

    Everything seemed to go well, I re-initalised the cam and the receiver showed it as a 'xcam module' (it used to refer to it as a 'xcam 1.04' before the upgrade) but when I try to go into the xcam menu on my receiver it just says 'please wait' and never displays anything.

    I don't have a CAS to try to talk to the cam directly, thats why I used the Funcard files.

    Any ideas?

    Thanks



Look Here ->
  • #2
    Junior Member
    Join Date
    Jan 2008
    Posts
    32
    Thanks
    15
    Thanked 12 Times in 3 Posts
    Rep Power
    199
    Reputation
    40

    Default

    l had same problem in different receivers, have you tried in a another receiver?
    Power off STB insert CAM then power back on may also work.

    Cheers
    Bubba

  • #3
    Junior Member
    Join Date
    Jul 2008
    Age
    56
    Posts
    45
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Rep Power
    192
    Reputation
    10

    Default

    I have tried the power off of the receiver etc but that didn't work.
    I don't have another receiver with a CI slot to try it on )c:

  • #4
    Junior Member
    Join Date
    Jan 2008
    Posts
    32
    Thanks
    15
    Thanked 12 Times in 3 Posts
    Rep Power
    199
    Reputation
    40

    Default

    Which receiver and firmware version are you using?
    XCam works in my Strong box and gets stuck with "please wait" in other STB's and have to reboot.
    Last edited by bubba1234; 19-07-10 at 01:06 PM.

  • #5
    Junior Member
    Join Date
    Jul 2008
    Age
    56
    Posts
    45
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Rep Power
    192
    Reputation
    10

    Default

    My receiver is a Strong also - I think its something like a 4658

  • #6
    Junior Member
    Join Date
    Jan 2008
    Posts
    32
    Thanks
    15
    Thanked 12 Times in 3 Posts
    Rep Power
    199
    Reputation
    40

    Default

    Quote Originally Posted by tokalaNZ View Post
    My receiver is a Strong also - I think its something like a 4658
    l am using Strong 4658X with firmware version 1.24 (link below) XCam Angel not Orion model works fine.
    May be problem during CAM firmware upgrade...
    You cannot upgrade CAM again with Funcard because you cannot access menu's?

    Last edited by bubba1234; 19-07-10 at 05:17 PM.

  • #7
    Junior Member
    Join Date
    Jul 2008
    Age
    56
    Posts
    45
    Thanks
    1
    Thanked 0 Times in 0 Posts
    Rep Power
    192
    Reputation
    10

    Default

    My receiver is 1.24 too so I might have to look at getting a CAS to fix this issue

  • Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •