re- goldie

[ditch]

Hi i bought two new recivers took the goldies out but it wont work now on the new recivers left it in on for two days still no good wont up date any ideas thanks

[sublib25]

Most new recievers won't run Irdeto1, us backward Aussies are probably the last to use it.
Knowing what Model reciever you have will also help.(you can load older software on some)
Alternatively you MIGHT be able to get hold of a old blue CI Cam.
Assuming your new box has CI slots.

[OSIRUS]

What receivers did you buy ?

some receivers will not support Irdeto 1 cards, in the card slot,

maybe there is a change of firmware you can do ?

or maybe you can use the goldie in a cam ?

or (unlikely) there is something wrong with the card.

Good Luck

[ditch]

Hi i have a strong srt 4900 have tried the cam and the slot but no good i think i will re conect the humax back up and try that and see what happends
thanks

[viewer]

cards inserted the right way? ...many imports and clones are chips up

[ditch]

thanks viewer have got them up the right way as i trided it with select card intel ON C1

[ditch]

I mean pas 8

[Nigel]

Have gold card working fine with 4900 both in slot and cam. Have latest software loaded from strong australia site. You may have already tried but turn box off at wall for a minute.
C if that helps.

[efab]

same as nigel working fine with no problems

[ditch]

tHANKS YOU GUYS re booting the set worked

[tristen]

tHANKS YOU GUYS re booting the set worked

Rebooting the receiver also resets the cam, which then reads the card again, hence the result described.

This is a standard method to ensure that that the card is updated and should always be attempted when confronted with such problems.