has to do with the lid switch/out of balance switch at the back, replace or bypass it.
when you press "start" button, she beeps and display "dE" , refuse to work
operation manual made no reference to this trouble shooting, anyone there
might had experience on this before ??? thanks
Look Here -> |
has to do with the lid switch/out of balance switch at the back, replace or bypass it.
Have you tried to rock the center agitator so its sort of away from any micro switches incase your load was out of balance.
Maybe power off then on and see how you go.
thanks Guys !
this one is top load drum auto washer, not having agitator at all.
shorted the door switch and still get same problem, whatever you go wash-rinse or rinse only, she would not start but display "dE".... control board ???
Is it a dE or a 5E error?
Page 8 under water does not drain if its 5E
If theirs no water supplied its 4E
If it is 5E theirs a drain with a filter on the lower rear of your washer. (page 5)
No mention of dE error.
Last edited by global88; 12-04-08 at 09:51 PM. Reason: Added more
yes, it is "dE", contacted with samsung and got one of their service agent who suggested: "door switch faulty". if it is control board faulty, no points !
I also was getting the de error, but It was after I solved a D1 error. I had to first replace the water regulator to get past that. Then along comes the De.
The De error was fixed by manually holding up the lid switch. I just used tape for the temporary solution and now all is great. I think it was just not pushing the switch up high enough to contact the metal of the switch.
hope this helps.
t
I had the same error (SW50ASP) and at first I didn't get any information on how to fix it. But later managed to fix it on my own with a friends help.
To Fix, on the lid of the top loading washing machine to the right side there is a small magnet fixed. The problem is the misalignment of this magnet. Screw it out and align/fasten it. Try several times if it doesn't work for the first time.
It worked for me.
Banned
Bookmarks