DiSeqC switch if your receiver supports it and most do.
I am probably dreaming but does any one know what multiswitch will let me connect a C-Band with V-box running an actuator as well as a KU band that is fixed (h and V - twin lnb) A**tar. If also possible i would also like to connect a KU band dish with a single universal LNB running a moctek motor if possible.
Look Here -> |
DiSeqC switch if your receiver supports it and most do.
From the sounds of it, you will need a multiswitch to hook up to the ku lnbf H/V outputs. You would then run one output off the multiswitch to an input on the diseqc switch and the C band dish to another input on the diseqc switch, then out to you receiver.
What would you do if your server was stolen or failed beyond repair?
http://www.2000cn.com.au/shadowprotect.html
Bookmarks