changing the rf channel on a pace box

[hrt-hsv]

hi... hoping someone can help me. I need to know how to get into the installer's setting's menu so i can change the rf channel on a fox pace d5250nf.5.1 box. i used a splitter and had 2 tv's running of the old box and then foxtel had to replace the old box and now i cant tune in the second tv to get the fox channel. any help would be very much appreciated.

cheer's hrt-hsv

[best4less]

If I remember right it was Pace 9949

[global88]

Have you scaned all the rf's particularly the uhf one.

Strange it wont pick it up unless you have something else working on that rf like a video recorder.

[best4less]

Because of the digital tv signals now it is very hard to find a free RF channel to tune your box too
What i do is un-plug the tv aerial and then tune the tv and box and then
plug the tv aerial back in and see if the picture disappears

[hrt-hsv]

thank's for the reply's. how i have it set up is fox is plugged into the video with the scart plug and then i have reversed a 2 way splitter coming out of the video aerial plug then 1 go's to the first tv and the second one go's to the other tv. it was working fine like that with the old box but since they replaced it with another when i scan the second tv to pick up the fox channel it cant find it. so my thought's are they have the fox box on a different rf channel, so i need to know how to change the rf channel so i can tune it in.

cheer's hrt-hsv

[global88]

Yes they most likely have the pace on a diffrent rf if it worked before but does not now.

Have you tried 9949 to get into the menu like best4less suggested?

[hoskoau]

If I remember right it was Pace 9949

I can never remember where to put the code in. What menu do you have to be on again?

[best4less]

LOL I can't even remember what the menu looks like
Just keep going through all the menu
you should see it some where

[hoskoau]

Found it. highlight picture settings and press on the remote 0611 on the remote and press select