If I remember right it was Pace 9949
hi... hoping someone can help me. I need to know how to get into the installer's setting's menu so i can change the rf channel on a fox pace d5250nf.5.1 box. i used a splitter and had 2 tv's running of the old box and then foxtel had to replace the old box and now i cant tune in the second tv to get the fox channel. any help would be very much appreciated.
cheer's hrt-hsv
Look Here -> |
If I remember right it was Pace 9949
When you do things right, people won't be sure that you have done anything at all
Have you scaned all the rf's particularly the uhf one.
Strange it wont pick it up unless you have something else working on that rf like a video recorder.
Because of the digital tv signals now it is very hard to find a free RF channel to tune your box too
What i do is un-plug the tv aerial and then tune the tv and box and then
plug the tv aerial back in and see if the picture disappears
When you do things right, people won't be sure that you have done anything at all
thank's for the reply's. how i have it set up is fox is plugged into the video with the scart plug and then i have reversed a 2 way splitter coming out of the video aerial plug then 1 go's to the first tv and the second one go's to the other tv. it was working fine like that with the old box but since they replaced it with another when i scan the second tv to pick up the fox channel it cant find it. so my thought's are they have the fox box on a different rf channel, so i need to know how to change the rf channel so i can tune it in.
cheer's hrt-hsv
Yes they most likely have the pace on a diffrent rf if it worked before but does not now.
Have you tried 9949 to get into the menu like best4less suggested?
LOL I can't even remember what the menu looks like
Just keep going through all the menu
you should see it some where
When you do things right, people won't be sure that you have done anything at all
Found it. highlight picture settings and press on the remote 0611 on the remote and press select
Bookmarks