You wont destroy anything... 1.7.1 will work but use a newer version of CCcam something above 2.0.5 to 2.0.8
To update CCcam just use the blue button, Addons, Cams and download it...
Newbie, Just a quick question before i destroy my mates F****l cable card,
Can i insert it into a DM500-S with Gemini and CCcam 1.7.1 , pointing @ 156e and expect to get a picture
Secondly, if i have to upgrade to CCcam 2.0.0 where can i locate erase.img, have tried dbnation with out success
regards Allover
Look Here -> |
You wont destroy anything... 1.7.1 will work but use a newer version of CCcam something above 2.0.5 to 2.0.8
To update CCcam just use the blue button, Addons, Cams and download it...
Toor
Thanks for your quick reply
Allover
I have tried to alter settings already set in the GP get to Transponder Scan set up and try to set up as per Toors instruction
Sat = OptusC1 (156.0) ok
Alter Freq from 12406 to 12358
Pol from vert to Horiz
Symbol rate from 29999 to 27800
Lock = can't
Sync= can't
Network search = can
Result = zilch
Still sticking with CCcam 1.7.1 at the moment until i can get a picture
If i am right the original settings were for the elite channels @ F....l ?
Can some one tell me what i am doing wrong
regards Allover
did you set the lnb settings in satellite configuration?
Toor
yes they are correct
allover
You need to get it to lock and sync without any Ber error if possible.
Make sure you have the right lnb setting, also dont be surprised if you need to adjust your lnb slightly, i had a similar problem awhile back were everything would work fine on one of my boxes but as soon as i put the dreambox in there was no signal, found that the lnb needed slight tuning, so im guessing the dreamboxes are very fussy to this which in a way is a good thing for me as when i put the other box back i had better signal.
Thanks satboy, will have to wait for another day as it is dark now here in Melb
regards Allover
Aaaaaggghhh, continuing on, realigned dish and LNB with sat finder and print out for C1 and finder max strength 7
Look at box top reading 56% signal 92%, BER 8224, have i a problem?
I have not seen BER below this figure all the time i have been playing
regards Allover
Should have added a gum trees top foliage appears to be way approx 50m away
regards Allover
one question... when you say "cable" card, you do mean "satellite" card, don't you?
Bookmarks