Have a Uniden GNS 8400 with uniden 2007 map data installed.
Uniden are not supplying latter Map data and i don't wish to throw this device in the bin, can anybody help with some up to date maps if possible?
Regards
Alat97
Look Here -> |
thanks
that should fit the bill.
upload then I will down load.
regards alat97
O.K,
I started upload, will give you link in the morning.
Regards Joe.
Here the link uploaded for you:
This folder took from my SD card uses for Uniden, copy whatever folder and files on your SD card save somewhere on PC for backup later, if mine not work for your device. Format sd card then extract rar into sd card, do not change anything, put the card back on device, power-on, if auto doesn't load to Navi, you have to press Navigation button. Let's me know, i'll try my best to help.
Regards Joe.
Last edited by laogia; 17-10-10 at 08:39 AM. Reason: update
Downloaded data, installed on new 1Gb SD card then booted up.
OK
But seems as though the screen resolution is not right.
Your GNS 8430 screen size is a bit larger the the GNS 8400.
Can this be changed to properly fit the 8400?
Thanking you for the Data
Regards
alat97
Hi!
Do you know what's size your unit resolution? mine 480x272, if you find out your unit res, i try looking data.zip for you.
Regards Joe.
If you saved old folder on PC, opened it and look on data.zip/igo_se1/this part shows your unit resolution
Last edited by laogia; 17-10-10 at 10:29 PM. Reason: update
GNS 8400 screen resolution not known.
can any body help?
alat97
From what I have been able to find the screen resolution appears to be 320X240 the same as the 3.5 inch model.
Cheers, Ian
Any sufficiently advanced technology is indistinguishable from magic!
@alat97!
I read on manual GNS 8400, and did not say resolution, but as Jards88 adviced, it should be the right one for your device resolution.
Here the link for data 320x240 just uploaded, incluced new igo.exe and sys.txt, i tried this data on device Emulator and confirm it's working. Download then replace on folder MobileNavigator, remember rename igo.exe to MobileNavigator.exe, and delete save folder before reload:
Joe.
All OK after resetting to
[gps]
port=5
baud=9600
Thanks joe for your help greatly appreciated
Regards
Al at97
What is the latest sensis maps ?
Are they available because R16.1 is a bit dated.
help
all at 97
alat97 (15-11-10)
thanks Bazzle greatly appreciated.
Regards
Al at97
folks still have the uniden gns 8400 but need lastest suitable maps.
any help out there.
Bookmarks