Enigma2 Azbox HD Elite and Premium

**Guardian** · 20-10-10, 05:57 PM

Here's the new version for testing:

OK hier is ie dan:

Dear friends of this great community, and proud owners of AzBox HD Devices ( currently only Elite/Premium supported ) there is new version of Enigma 2 by the_ripper and team for You :

Download:

What is new ?

- FTA SD and HD channels working. ( DD 2.0 , AC3 working by HDMI tested on Einsfestival HD )

- New IR driver ( few more mapped buttons e.g Info button, Audio selection is Check button on RCU )

- Fixed Section filters and PID selection.

- Added part of CA system

- Multimedia support for MPEG2 , MPEG4 ( XviD ), h264, and various audio support.

- Please read ReadMe file if You want also to install additional things to get working Multimedia by Media Player in E2.

- If You have Full HD TV , You can set resolution by editing bootup file located in :

/etc/init.d

Find line :

# Elite and Premium

below You will see line insmode ...

and replace existing insmode line with this one :

insmod /lib/modules/2.6.22.19-19-the_ripper/extra/em8634dvb.ko options="-analog -f PAL_BG -digital -f HDMI_1080p50 -hdmi_chip SiI9030 0 14 15 100 0"

Few tips :

Before loading Enigma 2 , move Your dish to some satellite ( Astra 19.2 e is good because of FTA HD channels ), as on E2 currently we didnt fix DiseQc bug ( We will fix it when we finish Premium+ driver ).

Try to use Simple configuration in Tuner Configuration, e.g choose satellite on which position currently You are.

README for MULTIMEDIA :

First download 2 .so filles attached to this post and put them in :

/usr/lib/gstreamer-0.10 directory, and after that follow procedure below :

If You want also to test Multimedia on AzBox Enigma 2 media player , You have to install 3 IPK files located in this archive :

gst-plugin-asf_0.10.16-r0.0_mipsel.ipk

gst-plugin-avi_0.10.25-r0.0_mipsel.ipk

gst-plugin-dvbmediasink-dbg_0.10+cvs20101006-r0_dm800.ipk

working formats:
audio: mpeg, aac, ac3, dts, wma (but not pro), pcm (not all ?)
video: mpeg2, mpeg4 (xvid), h264 (only show singe frames)

IPK Installation procedure :

Transfer 3 *.ilk files to /tmp folder of Your AzBox and run this commands, one by one :

ipkg install /tmp/gst-plugin-asf_0.10.16-r0.0_mipsel.ipk

ipkg install /tmp/gst-plugin-avi_0.10.25-r0.0_mipsel.ipk

ipkg install /tmp/gst-plugin-dvbmediasink-dbg_0.10+cvs20101006-r0_dm800.ipk

If You cant use ipkg install, use command opkg install or ipkg-extract .

If You see error while nstalling .ipk files, that is ok, dont worry about it, but dont forgett to transfer 2 .so files attached to my post in addons.zip archive to directory :

/usr/lib/gstreamer-0.10

**Guardian** · 20-10-10, 05:58 PM

instalation method is.
patch.bin in fat32 usb pen,
update boot menu, press update,
then reboot, then open azup and press "update" with usb stick STILL in azbox hd, using IP that shows in VDF.
then after update goes to 100%, remove usb and reboot.
all should go well to 100% in VDF display.

**Guardian** · 21-10-10, 11:50 PM

SD and HD channels works scrambled.
scrambled channel works!!!
CA support Fully Fixed.

new driver em8634dvb.ko attached ...
It is necessary to unpack the new file and FTP to transfer the location
lib/modules/2.6.22.19-19-the_ripper/extra

hmmm no attechments it's on satpimps guys

**tmsani** · 22-10-10, 12:25 AM

Has any tried Enigma2 on Azbox...Looking forward for some feedback....

**Guardian** · 22-10-10, 07:14 AM

CCcam and Mgcamd for Azbox with plugin start/stop/restart/cam info/autostart/desable autostart

Install

1.first enigma2-plugin-extensions-userscripts_2.4-r4_mipsel.ipk
2.enigma2-plugin-camd-mgcamd.1.35a_2.4-r1_mipsel.ipk
3.enigma2-plugin-camd-cccam.2.1.4_2.4-r0_mipsel.ipk
4.make folder /var/etc for your CCcam files and put your CCcam files

Restart box

5.Go to Main menu -Plugins-User Scripts-execute User Script from /usr/script
you can
start/stop/restart/cam info/autostart/desable autostart

For Mgcamd you have to put your config files to /var/keys

6.You have to change this in mg_cfg for AzBox

# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
# 06 dreambox/mips
# 08 stapi/kathrein
# 09 stapi/ipbox
# 11 stapi/openbox
B: { 06 }

and you have to make all other changes in configs for Mgcamd 1.35a

Tnx to Matrix10

still no attechments but on the pimps it's there

I tested tmsani and................. it works
But stil no disecq so you can only use single setup

**Frostilicus** · 25-10-10, 10:55 AM

But stil no disecq so you can only use single setup

disecq now works with the latest release i believe.

**LeroyPatrol** · 25-10-10, 11:07 AM

Has anyone here tried this? I only have an Az Ultra now.

....Leroy

**fandtm666** · 25-10-10, 01:46 PM

ill be testing it soon , they are upto

Enigma 2 v1.0.27
Devices Suitable for flashing: Elite and Premium
What is new:
- DiSEqC FIX (1.0, 1.1, 1.2 and USALS Manual too)
- DVB-S2 FIX
- Integrated BlackShadow2 skin by Matrix10
- Fixed boot error

**Guardian** · 25-10-10, 06:05 PM

Originally Posted by diavalo13666

ill be testing it soon , they are upto

Enigma 2 v1.0.27
Devices Suitable for flashing: Elite and Premium
What is new:
- DiSEqC FIX (1.0, 1.1, 1.2 and USALS Manual too)
- DVB-S2 FIX
- Integrated BlackShadow2 skin by Matrix10
- Fixed boot error

You have to use AzUp version 1.1 ( it's in the package )

Yes I'am running it on a Premium ( had to remove the DVB-T tuner otherwise no signal on DVB-S2 ) It's fast with CCcam guys.

Still has some strange behaviour ( sound drop offs) but it's working

Also have a look at the valerie project thius could be fun for azbox some users already tested valerie within E2 on Azbox.

Nice things are coming for Azbox

Team hopes SVN will be ready for everybody by the end off this month

**fandtm666** · 25-10-10, 07:08 PM

thanks guardian though i have seen nothing on the valerie project.

i have been keeping an eye on the development at azboxhd.es where they have a new forum dedicated the the E2 for the units ( thank god they have auto translate)

**tmsani** · 26-10-10, 12:06 AM

I am still waiting for premium+ version hopefully it will be out soon...Guardian is CCcam reading the internal cards?

**Woodie** · 26-10-10, 07:12 AM

Originally Posted by tmsani

I am still waiting for premium+ version hopefully it will be out soon...Guardian is CCcam reading the internal cards?

+1

**Woodie** · 26-10-10, 12:24 PM

New Forum and SVN site for AZBOX HD

**fandtm666** · 26-10-10, 01:17 PM

just read about
Project Valerie Media Center

now that would be great

**Guardian** · 26-10-10, 07:14 PM

Originally Posted by tmsani

I am still waiting for premium+ version hopefully it will be out soon...Guardian is CCcam reading the internal cards?

No there's no support for internal cardreaders (-YET-

)

Also a new forum is created guys to keep you in touch with Europe

It's in english:

Highly supported with knowlegde off E2 on Azbox

**Guardian** · 26-10-10, 07:16 PM

Originally Posted by diavalo13666

just read about
Project Valerie Media Center

now that would be great

It already runs on Azbox Enigma2, mediafiles working with mediacenter in E2 also run in valerie on Azbox.

New release soon (with .mkv support for mediacenter )

**cro69** · 26-10-10, 07:38 PM

keep us posted as to when internal reader is working?

**Guardian** · 26-10-10, 07:49 PM

Originally Posted by cro69

keep us posted as to when internal reader is working?

I will, or just regester on eu forum ( I already saw the first aussies

)

Just cardreader aren't high on the list, first

- Stable DVB-S2 ( for all models )
- Support for DVB-C and DVB-T tuners

Although releasing the SVN could speed up things

**Frostilicus** · 26-10-10, 09:00 PM

svn here soon

**Guardian** · 26-10-10, 11:52 PM

Enigma 2 v1.0.28

Devices suitable for flashing : Elite and Premium

What is new :

- Fix for no signal on DVB-S2 tuner for some users

- Multimedia fix for various formats by sattomy