... the WL-500 MF ... is Draft 802.11n compliant, fully compatible with 802.11b/g .. so if your PC is also Draft 802.11n compliant then you should be fine ...
First start by trying to make a BASIC connection - don't use any encryption, have visible SSID ...
... log-into your WL-500 MF via RJ45 port and do a 'site survey' ... check to see if you can 'see' your PC and its corresponding MAC address (if its ID is not visible) ...
If you get past these stages - then its a matter of fine tuning the complete set-up ... one step at a time ...
If you can't get basic 'open' connection to your PC - then you might have something wrong with PC setup ... I say PC since the WL-500 ML seem to work out of the 'box' in the basic (default) setups ...
Hope this helps ...
EDIT: ... BTW ... what laptop do you have and what wireless net hardware does it use? ... its odd that it only supports .11n ... is the .11n network enabled in the laptop? ... just some basic checks ... as I'm not sure which system you have
Bookmarks