Relook 400S neumo 3.4.2 image

[jgm]

The latest update (r4033) looks to be very close to a full release version. I've only tried it as a client to the vu+duo with oscam and haven't played with all functions yet. It's available at neumoteam.org/~deeptho/neumex and is supported by PCEditor 1.2.59.1

As with all neumo images, softcams aren't officially supported, so you have to install them yourself. I recommend saving important /var directories (bin, etc, emu, keys, scripts) to /var/data, & after flashing the new image, delete them from /var and recreate them as symlinks to /var/data.

[raygbmw1]

jgm

I've downloaded the latest release and flashed my 400s. I have the emu loaded and re-scanned the services.

I have prob in running CCcam as a client it stops as shown in the log below:
0941.695 CCcam: ================================================== =========
==========
0941.697 CCcam: online using nodeId ad48d24ff5b28ee3
0941.994 CCcam: FORCED(!) dvb api1
0941.998 CCcam: Relook detected
0941.998 CCcam: create 2 cam device(s)
-
-
-
0942.009 CCcam: server started on port 12000
0942.170 CCcam: newcamd server 192.168.1.102:10000 user: formal
0942.255 CCcam: newcamd caid 096c providers 1 userid: 0
0942.256 CCcam: newcamd card serial: xxxxxxxx
0942.257 CCcam: newcamd prov 00 000000 xxxxxxxx
0942.269 CCcam: no working cam devices, no need to start pmthandler

Do you have an idea? My cfg file only has the N line.

regards
Ray

[jgm]

You can only run CCcam 1.7.0, 1.7.1 or 2.0.0 & you need to run capmtserver as well - look for them on denktenk. I'm chasing some issues with time setting and EPG with the developers, and there are still a few problems with stability, but overall it is looking promising.

[raygbmw1]

Thanks jgm!

I am running CCcam 2.0.0. but without the capmtserver I get it loaded.

I also been following your thread in dentenk and that is why I decided to try neumo.

[jgm]

Do you have issues with time too?

[raygbmw1]

Jgm

I am having problem trying to run CCcam because the library libgcc_s_nof.so.1 is not found in the lib directory. I got a copy of this file but lib directory is set to 755 so I can't add the file.

I will reflash it again with the last release and start with that and then re-flash it again with the latest test version.

[jgm]

I think you have the wrong version of CCcam. I have both 1.7.1 & 2.0.0 which both run, and I don't have libgcc_s_nof.so.1.

I'm only running my 400 as a client to a Vu+ Duo oscam server with mgcamd at present, but have run it with CCcam in the past.

[Hamram]

Hi!
I've just installed this image, and it seems to be working all right on most functions. However, I can't make recordings... If I press "Record", a messagebox is popping up on the screen, telling me to choose program to record, only thers's no programs to choose from. If I just press "OK", nothing happens. If I stress the receiver to much, it is showing "Error" or "Panic" in the display, and then it's just shutting down.

Any good advice..

[raygbmw1]

Ok, for those who does not have the CCcam in their Neumo image, this is what i did:

1. downloaded this is from japie at dentenk.

2. copy the file 'oscam_1.0r3508_powerpc.ipk' to /tmp of relook using DCC

3. use telnet to issue a command ipkg install /tmp/oscam_1.0r3508_powerpc.ipk

4. Once installed, I change the CCcam.cfg as required

5. Reboot relook

Presto I got the CCcam installed and with the necessary script (2.1.sh) to automatically reload CCcam everytime I reboot the system. A very big thank you to japie in Dentenk forum.

[jgm]

Hi!
I've just installed this image, and it seems to be working all right on most functions. However, I can't make recordings... If I press "Record", a messagebox is popping up on the screen, telling me to choose program to record, only thers's no programs to choose from. If I just press "OK", nothing happens. If I stress the receiver to much, it is showing "Error" or "Panic" in the display, and then it's just shutting down.

Any good advice..

I'm getting a screen with 4 * 1/2 hour tickboxes & a Cancel & OK box as well. When I check the appropriate boxes, I record the current program. You should also be able to use the EPG to record, but I'm still having issues with time & EPG, so haven't tried this yet.

[jgm]

Presto I got the CCcam installed and with the necessary script (2.1.sh) to automatically reload CCcam everytime I reboot the system. A very big thank you to japie in Dentenk forum.

Glad to hear you've got it going. For the autostart function (usually 3.1.sh) I just copy one of the existing scripts in /var/scripts, rename it & edit it to just start the appropriate cam. It will automatically create a symlink in /var/bin/init.d

[jgm]

I've got a workaround for the timezone issue. Add the following line to /var/bin/init.d/2.1.sh at line 2:

front_ioctl --job settime

[gbrowne]

Hi Guys,

I just discovered this thread. So glad to read that Deeptho and Neumex crew are still developing the 400s code. Its a great box and it deserves to keep going. Amazing work on the relook-remux driver - damn clever stuff.

Just one question - can anyone please tell me if the IPTV (IPCHANNEL) functions still work properly in the new release ? I can't get it working on the relook400s.relook.3.2.1.pal.r3784 image I am using.

Can't wait to try out the new code.

Cheers,
GB

[Strada916]

ok
I have a relook 400s that I am playing with. How did you guys load your images? I got latest DGS image 2.17. When i flash the box with neumo 3.2.0 it just stays on booting it will not boot. Sorry to hi jack Maybe I should start a new thread. OPs please move if needed. Thanks S

[jgm]

I've had issues at times with new images. From memory, I found a serial-all image on denktenk & flashed that first before upgrading. I wouldn't worry about neumo 3.2.0 just go straight to neumo 3.4.2. You could also look on denktenk to find more details on flash problems.

[Strada916]

denktenk do not have 3.4.2 on there downloads DB. Where did you get yours from ? neumex team website?

[jgm]

neumex team website?

Yes

[Strada916]

ok got it loaded, just need to edit to satellite info and transponders

[weirdo]

ok got it loaded, just need to edit to satellite info and transponders

Use this >

[Strada916]

Use this >

I would love to use that but DGS based firmware does not use the satellite.xml file it uses .dat

jgm do you have a dat file with Optus C1?