Also, this card works in Strong BOX, by the way.
In the last two weekends, I just tried to use CCCam to read one of the TV8J@de card and shared to another room (DM800, Smargo USB card reader). However, I think I should give it up. Just a painful job.
That's everything I can get from 16001 port.
card reader /dev/ttyUSB0
handled 29(29) ecms and 1(1) emms
Irdeto card
Caid 604 ACS 1030 MCR
Cardserial [Card S/N] Xh€h?hê7???s1@ (d9549)
Provider 00 013d17
Chid 0007 - date 0x3b valid 0x1
Chid 0008 - date 0x3b valid 0x1
Chid 0009 - date 0x3b valid 0x1
Chid 000A - date 0x3b valid 0x1
Chid 000B - date 0x3b valid 0x1
Chid 000C - date 0x3b valid 0x1
Chid 000D - date 0x3b valid 0x1
Chid 000E - date 0x3b valid 0x1
Chid 0012 - date 0x3b valid 0x1
Chid 0011 - date 0x3b valid 0x1
Chid 0015 - date 0x3b valid 0x1
Chid 0013 - date 0x3b valid 0x1
Chid 0016 - date 0x3b valid 0x1
Chid 0017 - date 0x3b valid 0x1
It is looks like that Ir2 card could be ready by DM800 via USB Smargo. However, still get black screen when the "I" indicator on the channel OSD turns to green.
I don't know why or how.
I think I may need give it up in CCcam, and go to OSCam to try my luck.
Any body got any idea in CCCam for this card, provider or program??
166 Ku TV8J@de, J@de W0rld.
Look Here -> |
Also, this card works in Strong BOX, by the way.
Very Pain!! Isn't it?
No pain just more fun things to try! You might want to try the card in IRServer and see if you can connect your DM800.
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
No pain, no gain. I'll try it tonight.
Check your CCcam cfg
Add this to the cfg if it's not already there.
CAMKEY: /dev/sci0 00 00 00 00 00 00 00 00
CAMDATA: /dev/sci0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Last edited by sublib25; 06-12-10 at 05:27 PM.
Try this
SERIAL READER : /dev/tts/0
SMARTCARD CLOCK FREQUENCY: /dev/tts/0 6000000
CAMKEY: /dev/tts/0 00 00 00 00 00 00 00 00
CAMDATA: /dev/tts/0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
TRY ALL CHIDS : /dev/tts/0
Replace /dev/tts/0 with /dev/ttyUSB0
Thanks Windy, it works!!!!!
Cheers Windy,
Didn't read that he was running a smargo.
The card should also work in the slot without the smargo.
Just have to use the cfg addressed to the card slot.(sci0)
Last edited by sublib25; 06-12-10 at 07:38 PM.
Hi All, ,
I have 2 X DM500 with CCcam and original TV8J@de I2 card, can DM500 built in slot read this card. I tried before but no luck, Should I need to buy the Smargo USB card reader like Comti? Appreciate your help.
Bookmarks