ps2 What laser do i have ?

[satchY]

Hi guys i have a 39002 ps2 but what laser do i need to buy ?

how do i check what this one is and what i need to replace it with

i bought a hd-7 of ebay and desoldiered the soldier for the diodes and it seems

to be working put does not load my discs i have a chipped ps2 i have tryed all

types even original media ? i put the old lens back in and it works again ????

please help us out cheers

[ozchips]

take the onld one out mate and on the side there may be a stickeer , the laser number will be something like KHS-400B or something

or download a little proggie called lens changer and use that ,

[Micksxboxmods]

Hi guys i have a 39002 ps2 but what laser do i need to buy ?

how do i check what this one is and what i need to replace it with

i bought a hd-7 of ebay and desoldiered the soldier for the diodes and it seems

to be working put does not load my discs i have a chipped ps2 i have tryed all

types even original media ? i put the old lens back in and it works again ????

please help us out cheers

should be HD7 or 400B mate, one or the other.

what is the resistance of the lens coils on the new one(might be a dud)?
Mick

[satchY]

yeah tryed the lens changer didnt do anything i think the new laser hd7 i have got it is faulty or something

[satchY]

should be HD7 or 400B mate, one or the other.

what is the resistance of the lens coils on the new one(might be a dud)?
Mick

hey mick whats the best way to check it ?

[Micksxboxmods]

hey mick whats the best way to check it ?

a multimeter mate

[satchY]

a multimeter mate

yeah but where abouts mick and what should it read ?

cheers

[Micksxboxmods]

should be over 4 Ohms

[satchY]

should be over 4 Ohms

mick i got 3.6 ohms on coil 1 and 3.8 ohms on the coil 2 is that bad ?

[Ljay]

If the laser was originally a KHS-400C(400B were on V3 & 4) u cant just stick a R-type/HD7 & expect it to work.You need to use the lenschanger program as stated above.
Also, all ps2 lasers are refurbs,& they are flakey IMO.

[satchY]

If the laser was originally a KHS-400C(400B were on V3 & 4) u cant just stick a R-type/HD7 & expect it to work.You need to use the lenschanger program as stated above.
Also, all ps2 lasers are refurbs,& they are flakey IMO.

Hey Ljay i did use the program i tryed hd-7 and sanyo with no luck

[ramrod]

should be HD7 or 400B mate, one or the other.

what is the resistance of the lens coils on the new one(might be a dud)?
Mick

Ahh you mean HD7 or 400C
400B used in 30002 V3 or 30002R V4

[consoletronics]

if your original laser was 400C (3900 never used 400B) , for a quick testing, HD7 should just work without lens changer. it starts slowly then reads fine after.

if your origianl one was HD7 and you put a 400C, it won't work at all without lens changer.

[Micksxboxmods]

400C...400B who gives a toss, if you are replacing something this old, I'd be seriously looking at replacing the console, unless it is chipped. No offence to owner intended.

[satchY]

400C...400B who gives a toss, if you are replacing something this old, I'd be seriously looking at replacing the console, unless it is chipped. No offence to owner intended.

yup its chipped and has a hdd slimmys cant do this