Ok after alot of studdy i know how to calculate the tweak keys, the information is all around but not concret, it is done with the i.r.s.e.r.v.e.r patched version. Thanks a lot to this forum, it has great information.
davo, did you use a patch to get the tk's functionality, i just compiled v1.20 snv build #5947(i686) no luck, not able to see this function, any sugestions?
Ok after alot of studdy i know how to calculate the tweak keys, the information is all around but not concret, it is done with the i.r.s.e.r.v.e.r patched version. Thanks a lot to this forum, it has great information.
0664 no open helpme please !!!
marzoid (19-02-12)
Thats because they only use one set of keys. If you ran the patched version on Telkomvision your would see a 4 rotating set of tks. One is infact the same as you posted.
DM500s Black with rear on/off switch $99 inc post , DM800 sim 82 $250 inc post, DM800SE $310 inc
Onefella (27-09-11)
Until now i saw 93FxxxxxxxF33 and 5B6ExxxxxxxA76, this is for an africa provider, don´t know if you recognise this tks.
0664 no open helpme please !!!
@thx to pimposteka
oscam versiyon latest 5961
DM8000HD sci0 slot
card is 42 series
2011/09/26 23:37:10 32055B50 c update (0664&000000/10CE/4C:7918): not found (138 ms) (of 0 avail 1) (irdeto_do_cmd [2] 90 00)
2011/09/26 23:37:12 32055B50 c update (0664&000000/10CE/58:34A7): not found (156 ms) (of 0 avail 1) (irdeto_do_cmd [2] 90 00)
2011/09/26 23:37:12 32055B50 c update (0664&000000/10CE/4CF97): not found (139 ms) (of 0 avail 1) (irdeto_do_cmd [2] 90 00)
2011/09/26 23:37:12 32055B50 c update (0664&000000/10CE/4C:7918): not found (138 ms) (of 0 avail 1) (irdeto_do_cmd [2] 90 00)
2011/09/26 23:37:12 32055B50 c update (0664&000000/10CE/4C:FF13): not found (140 ms) (of 0 avail 1) (irdeto_do_cmd [2] 9e 00)
2011/09/26 23:37:13 32055B50 c update (0664&000000/10CE/4C:2F37): not found (138 ms) (of 0 avail 1) (irdeto_do_cmd [2] 90 00)
2011/09/26 23:37:14 32055B50 c update (0664&000000/10CE/4C:97B3): not found (141 ms) (of 0 avail 1) (irdeto_do_cmd [2] 9e 00)
2011/09/26 23:37:14 32055B50 c update (0664&000000/10CE/4C:0CAA): not found (139 ms) (of 0 avail 1) (irdeto_do_cmd [2] 90 00)
Last edited by notropil; 28-09-11 at 01:04 AM.
2011/09/27 1700 55C018 r Maximum frequency for this card is formally 6 Mhz, clocking it to 6.00 Mhz
2011/09/27 1701 55C018 r detect irdeto card
2011/09/27 1701 55C018 r caid: 0664, acs: 0.06, country code: TUR
Unix starttime: 1317132656
Starttime: 27.09.11 1756
Version: 1.20-unstable_svn Rev. 5960
Max PID: unlimited
Active modules:
Web interface support: yes
SSL support: no
DVB API support yes
DVB API with STAPI support: no
Anti-cascading support: yes
ECM doublecheck: no
Irdeto guessing: yes
Debug mode: yes
LED support: no
Q-Box HD LED support: no
Log history: yes
Monitor: yes
Loadbalancing support: yes
LCD support: no
camd 3.3x: no
camd 3.5 UDP: yes
camd 3.5 TCP: yes
newcamd: yes
CCcam: yes
gbox: yes
radegast: yes
serial: yes
constant CW: yes
Cardreader: yes
Nagra: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
NDS Videoguard: yes
DRE Crypt: yes
TONGFANG: yes
Last edited by notropil; 28-09-11 at 01:15 AM.
2011/09/27 17:25:44 2C50B4B0 c dummy (0664&000000/05E6/54:49B9): not found (165 ms) (of 1 avail 1) (irdeto_do_cmd [2] 9e 00)
2011/09/27 17:25:44 2C50B4B0 c dummy (0664&000000/05E6/54:98E4): not found (165 ms) (of 1 avail 1) (irdeto_do_cmd [2] 9e 00)
2011/09/27 17:25:44 2C50B4B0 c dummy (0664&000000/05E6/54:8ADE): not found (164 ms) (of 1 avail 1) (irdeto_do_cmd [2] 9e 00)
2011/09/27 17:25:44 2C50B4B0 c dummy (0664&000000/05E6/54:07F4): not found (165 ms) (of 1 avail 1) (irdeto_do_cmd [2] 9e 00)
2011/09/27 17:25:44 2C50B4B0 c dummy (0664&000000/05E6/54:3742): not found (164 ms) (of 1 avail 1) (irdeto_do_cmd [2] 9e 00)
2011/09/27 17:25:44 2C50B4B0 c dummy (0664&000000/05E6/6C:8851): not found (203 ms) (of 1 avail 1) (irdeto_do_cmd [2] 33 00)
2011/09/27 17:25:45 2C50B4B0 c dummy (0664&000000/05E6/54:8F5F): not found (164 ms) (of 1 avail 1) (irdeto_do_cmd [2] 9e 00)
2011/09/27 17:25:45 2C50B4B0 c dummy (0664&000000/05E6/54:4F76): not found (165 ms) (of 1 avail 1) (irdeto_do_cmd [2] 9e 00)
caid: 0664, acs: 0.06, country code: TUR
dm8000 sci0 slot
Uxstarttime: 1317133318
Starttime: 27.09.11 17:21:58
Version: 1.00-unstable_svn Rev. 4100
Maxpid: UNLIMITED
Active modules:
Webif support: yes
Webif with SSL support: no
Dvbapi support: yes
Dvbapi with stapi support: no
Gbox support: no
Anticasc support: yes
ECM doublecheck: no
Irdeto guessing: yes
Debug: yes
LED support: no
Qboxhd-LED support: no
Log history: yes
Monitor: yes
Camd33: yes
Camd35 UDP: yes
Camd35 TCP: yes
Newcamd: yes
Cccam: yes
Radegast: yes
Serial: yes
ConstCW: yes
Cardreader: yes
Nagra: yes
Irdeto: yes
Conax: yes
Cryptoworks: yes
Seca: yes
Viaccess: yes
Videoguard: yes
Dre: yes
Tongfang: yes
Last edited by notropil; 28-09-11 at 02:13 AM.
what Tweak keys Key0: end Key1: help
what Tweak keys Key0: end Key1: help !!!
Hi all
I came across this thread looking for tweak key, it help a lots, Many thanks....
Now am using version oscam 4100 + I.Rs.e.r.v.e.r but need put key every time
If anyone know any version for oscam auto tweak plz help. Once again Thanks
Last edited by vispoo; 03-10-11 at 05:28 PM.
The auto keys are one story to solve but I have an additional problem that I am not able to solve since using the twk version (thanks to Ozir!).
I run a ACS 4.06 on CAID 0606 with Oscam twk 1.00-unstable_svn build #5070 (i686-pc-linux-libusb) (also tryed #4196 by Ozir). All works fine until 08:16 or 20:16 I end up with:
After inserting the card in the original receiver (old style IRD 720i) I get back picture after about 1 to 5 minutes. Back into OSCAM I immediately get pic again.Code:me (0606&000000/07B2/3C:602D): not found (314 ms) by smargo (of 1 avail 1) - ARD (smargo irdeto_do_cmd [2] 91
I don't know if this is a config issue (missing specific EMMs) or an hardware issue.
May hardware:
Linux kernel 2.6.31.5 (SuSE), Smargo Reader (Maxdigital)
Connection via sc-plugin (1.0.0pre-AR-61975953edd0)
trying CCCam, Newcamd and Camd - no diff in behaviour
My oscam.server
oscam.userCode:[reader] label = smargo protocol = smartreader device = 002:003 services = services1 smargopatch = 1 caid = 0606 boxid = 94..84 rsakey = 94......CF force_irdeto = 1 boxkey = 11...88 tk0 = D4...9C tk1 = F0...CD detect = cd mhz = 600 cardmhz = 600 ident = 0606:21915C,FFFFFF,000000 chid = 0606:00002F,0000C0,0003EA,0003EB,0003EC group = 1 emmcache = 1,3,31 blockemm-unknown = 1 blockemm-g = 1
oscam.confCode:[account] user = me pwd = mine group = 1 au = smargo services = services1 caid = 0606 ident = 0606:21915C,FFFFFF,000000 chid = 0606:00002F,0000C0,0003EA,0003EB,0003EC
My sc-plugin connects as follows:Code:[global] usrfile = /var/log/oscam/oscamuser.log logfile = /var/log/oscam/oscam.log cwlogdir = /var/log/oscam/cw nice = -1 maxlogsize = 99999 preferlocalcards = 1 saveinithistory = 1 [newcamd] port = 10000@0606:000000,21915C,FFFFFF serverip = 192.168.178.24 key = 0102030405060708091011121314 keepalive = 0 [cs357x] port = 11003 serverip = 192.168.178.24 [cccam] port = 10001 reshare = 0 ignorereshare = 1 version = 2.1.4 [webif] httpport = 8848 httpuser = me httppwd = mine httpallowed = 192.168.0.0-192.168.255.255
Am I missing something or is there no chance in getting this done?Code:cccam2:127.0.0.1:10001:1/0606/FFFF:me:mine #newcamd:192.168.178.24:10000:1/0606/FFFF:me:mine:0102030405060708091011121314 #camd35:192.168.178.24:11003:1/0606/FFFF:me:mine
Any further info needed?
Thx!
@cnam
looking at the times that your problem is happening I would suggest your missing an update.
Generally speaking plainkeys are changed a couple of times a day normally once in am & once in pm.
My guess is by placing the card back in your provider decoder the card receives new plainkeys and will work till the next roll.
Your problem would more than likely be the client not sending the correct emms to keep your card happy. or your blocking the required emm (maybe yours is a global/unknown emm that you have blocked in config )or your client isnt passing the correct emm to oscam.
a couple of config changes i would try are...
oscam.server
------------
try ...
ident = 0606:000000,000000,000000
remove...
#chid = 0606:00002F,0000C0,0003EA,0003EB,0003EC
#emmcache = 1,3,31
#blockemm-unknown = 1
#blockemm-g = 1
oscam.user
------------
try...
au = 1
remove...
#caid = 0606
#ident = 0606:21915C,FFFFFF,000000
#chid = 0606:00002F,0000C0,0003EA,0003EB,0003EC
oscam.conf
------------
[newcamd]
try...
port = 10000@0606:000000,000000,000000
keepalive = 1
The biggest problem is people try to get to cute with their config files, try to control everything and some time LESS is BEST.
I don't have half the shit you have in your configs. Best thing to do is start with the minimum and when you are happy with it working then and only THEN try other things.
AND
try mgcamd you will find mgcamd sends emms better than other clients on most occasions,
Good luck.
personally in oscam.conf & oscam.server i would use
oscam.server (unless you need 3 provider IDs specified if so then use 3x 000000as above)
-------------
ident = 0606:000000
oscam.config - (newcamd section mirror the above)
port = 10000@0606:000000
and i wouldnt block any emms, UNTIL you know for sure what type of emm you updates are housed in, NORMALLY shared & unique are all that are needed, but you may find that your required emm is a global or an unknown,
or in a long shot you maybe caching it with the following in your oscam.server file...
emmcache = 1,3,31
unlikely but thats the only other thing i can think of.
also get you hands on a full auto updating version of oscam tweak then you don't have to specify them in your configs.
cheers
Davo
Bookmarks