Can you provide a liink. All the Altech UEC sites I have looked at dont appear to have one.
Hi All,
I notice the Altech UEC web site listed a software update for the DSD 4121 today.
Has anyone tried it yet
VAST Satellite Receivers
DSD4121 Software version 2.11 L30 (2011-01-14) ZIP or Self extracting EXE
Link:
Last edited by dstudd; 14-01-11 at 11:10 PM. Reason: Add Link
Look Here -> |
Can you provide a liink. All the Altech UEC sites I have looked at dont appear to have one.
Last edited by earlsdon; 14-01-11 at 11:15 PM.
surely it would be available OTA?
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
bodgie (15-08-11)
I don't need to know how you add glitter to your turd
Ag
Energy is the father of creation
Now the firmware is available - surely someone can reverse engineer it or tinker with it..
The text section at the end of the firmware code looked interesting - containing brief info on the firmware (I viewed the firmware file - upgrade.uec - in UltraEdit - although any text editor will do)
Wish I knew a lot more about the code they use - been far too long since I played this sort of stuff.
Anyone tried doing an OTA update through the menu?
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
Reality is an invention of my imagination.
ಠ_ಠ
Here's the contents of the text file that accompanies the update on the UEC site:
1. Format USB drive to FAT32. In Windows go to "My Computer" and right click the drive letter corresponding to your USB key then choose "Format". In the "File system" otion choose "FAT32" then press start. A warning will be displayed informing you the cotents of this drive will be deleted. Press OK.
2. Copy the included file "upgrade.uec" to the USB stick.
3. GO back to "My computer", right click the drive corresponding to the USB stick and select EJECT.
4. Remove the USB stick from your PC.
5. Remove power from your DSD4121 decoder and insert the USB stick into the back of the DSD4121 decoder.
6. While holding down the "<CH" and "CH>" buttons on the front panel of the DSD4121 decoder reinsert the power cable.
7 Keep the "<CH" and "CH>" buttons depressed untill the front panel fo the DSD4121 decoder shows a spinning circle.
8 The upgrade will now start and should be complete within about 4 minutes. After completion the DSD4121 will reboot itself and startup normally. You can now remove the USB stick from the DSD4121 decoder.
NOTE: Not all USB sticks are supported by the DSD4121. If the upgrade fails it could be because the USB drive is not supported.
Known working USB sticks:
IMATION 4GB.
IMATION 128MB HMDS-128C
KINGSTONE Datatraveler 4GB
SANDISK CRUZER MICRO 8GB
Known NOT working USB sticks:
KINGSTON Datatraveler 2GB
After following the above destructions, all I achieved was error codes on the decoder screen.
Why can't they just work like any normal system using a menu? Yes UEC is a turd without the glitter!
Has anyone else had any success with it?
Did you ask UEC support what the benefits of the software upgrade was before you tried to install it, or did you go in blindfolded?
The following is the TEXT part of the machine code mentioned above (it can be read by putting the file:- upgrade.uec - in a text editor and then scrolling to the end of the file). It is not the text file included in the zip and reproduced above by dstudd.
............................
I00=akrisgone
I01=01
I02=35
I03=030
I08=207
I09=000
I10=000
I11=0000
I12=00281
I13=1
I14=1
I20=O:\SOURCE\UEC\OPTUS DSO\X35\DSD4121_FINAL_2_11_066001597.BIN
I21=UEC211030.S35V11F
I22=R:\MANUCFG\UEC\X35\UECX_X35.CFG
I23=UEC211030.C35V11F
I40=
I41=0000
I42=31 q
I43=
I44=
I45=OS ver 5. 1
I46=
I47=00000
I50=;
; UEC Configuration file for bin2ird
;
; This file is for the DSD4121 with
; single image Secure Loader v3
; CRC Control block size is 0x2000 bytes and resides at the
; start of first customer-code partition.
;
[Manufacturer_Data]
MANUFACTURER_ID=1
HARDWARE_VERSION=53
LOADER_VERSION=3.1
NON_CRC_PAR_COUNT=0
NON_CRC_DATA_COUNT=0
;
; IRD Loader Parameters
;
[Flash_Configuration]
;The device has 287 sectors.
;The sector size is 128KB
;The "first 32" sectors (4.0MB) are for the loader.
;Remaining sectors are thus 287-32 = 255.
FLASH_BLOCKS=255
BLK1_STRT=0x40200
BLK1_LEN=0x1e000
BLK2_STRT=0x42000
BLK2_LEN=0x20000
BLK3_STRT=0x44000
BLK3_LEN=0x20000
BLK4_STRT=0x46000
BLK4_LEN=0x20000
BLK5_STRT=0x48000
BLK5_LEN=0x20000
BLK6_STRT=0x4a000
BLK6_LEN=0x20000
BLK7_STRT=0x4c000
BLK7_LEN=0x20000
BLK8_STRT=0x4e000
BLK8_LEN=0x20000
BLK9_STRT=0x50000
BLK9_LEN=0x20000
BLK10_STRT=0x52000
BLK10_LEN=0x20000
BLK11_STRT=0x54000
BLK11_LEN=0x20000
BLK12_STRT=0x56000
BLK12_LEN=0x20000
BLK13_STRT=0x58000
BLK13_LEN=0x20000
BLK14_STRT=0x5a000
BLK14_LEN=0x20000
BLK15_STRT=0x5c000
BLK15_LEN=0x20000
BLK16_STRT=0x5e000
BLK16_LEN=0x20000
BLK17_STRT=0x60000
BLK17_LEN=0x20000
BLK18_STRT=0x62000
BLK18_LEN=0x20000
BLK19_STRT=0x64000
BLK19_LEN=0x20000
BLK20_STRT=0x66000
BLK20_LEN=0x20000
BLK21_STRT=0x68000
BLK21_LEN=0x20000
BLK22_STRT=0x6a000
BLK22_LEN=0x20000
BLK23_STRT=0x6c000
BLK23_LEN=0x20000
BLK24_STRT=0x6e000
BLK24_LEN=0x20000
BLK25_STRT=0x70000
BLK25_LEN=0x20000
BLK26_STRT=0x72000
BLK26_LEN=0x20000
BLK27_STRT=0x74000
BLK27_LEN=0x20000
BLK28_STRT=0x76000
BLK28_LEN=0x20000
BLK29_STRT=0x78000
BLK29_LEN=0x20000
BLK30_STRT=0x7a000
BLK30_LEN=0x20000
BLK31_STRT=0x7c000
BLK31_LEN=0x20000
BLK32_STRT=0x7e000
BLK32_LEN=0x20000
BLK33_STRT=0x80000
BLK33_LEN=0x20000
BLK34_STRT=0x82000
BLK34_LEN=0x20000
BLK35_STRT=0x84000
BLK35_LEN=0x20000
BLK36_STRT=0x86000
BLK36_LEN=0x20000
BLK37_STRT=0x88000
BLK37_LEN=0x20000
BLK38_STRT=0x8a000
BLK38_LEN=0x20000
BLK39_STRT=0x8c000
BLK39_LEN=0x20000
BLK40_STRT=0x8e000
BLK40_LEN=0x20000
BLK41_STRT=0x90000
BLK41_LEN=0x20000
BLK42_STRT=0x92000
BLK42_LEN=0x20000
BLK43_STRT=0x94000
BLK43_LEN=0x20000
BLK44_STRT=0x96000
BLK44_LEN=0x20000
BLK45_STRT=0x98000
BLK45_LEN=0x20000
BLK46_STRT=0x9a000
BLK46_LEN=0x20000
BLK47_STRT=0x9c000
BLK47_LEN=0x20000
BLK48_STRT=0x9e000
BLK48_LEN=0x20000
BLK49_STRT=0xa0000
BLK49_LEN=0x20000
BLK50_STRT=0xa2000
BLK50_LEN=0x20000
BLK51_STRT=0xa4000
BLK51_LEN=0x20000
BLK52_STRT=0xa6000
BLK52_LEN=0x20000
BLK53_STRT=0xa8000
BLK53_LEN=0x20000
BLK54_STRT=0xaa000
BLK54_LEN=0x20000
BLK55_STRT=0xac000
BLK55_LEN=0x20000
BLK56_STRT=0xae000
BLK56_LEN=0x20000
BLK57_STRT=0xb0000
BLK57_LEN=0x20000
BLK58_STRT=0xb2000
BLK58_LEN=0x20000
BLK59_STRT=0xb4000
BLK59_LEN=0x20000
BLK60_STRT=0xb6000
BLK60_LEN=0x20000
BLK61_STRT=0xb8000
BLK61_LEN=0x20000
BLK62_STRT=0xba000
BLK62_LEN=0x20000
BLK63_STRT=0xbc000
BLK63_LEN=0x20000
BLK64_STRT=0xbe000
BLK64_LEN=0x20000
BLK65_STRT=0xc0000
BLK65_LEN=0x20000
BLK66_STRT=0xc2000
BLK66_LEN=0x20000
BLK67_STRT=0xc4000
BLK67_LEN=0x20000
BLK68_STRT=0xc6000
BLK68_LEN=0x20000
BLK69_STRT=0xc8000
BLK69_LEN=0x20000
BLK70_STRT=0xca000
BLK70_LEN=0x20000
BLK71_STRT=0xcc000
BLK71_LEN=0x20000
BLK72_STRT=0xce000
BLK72_LEN=0x20000
BLK73_STRT=0xd0000
BLK73_LEN=0x20000
BLK74_STRT=0xd2000
BLK74_LEN=0x20000
BLK75_STRT=0xd4000
BLK75_LEN=0x20000
BLK76_STRT=0xd6000
BLK76_LEN=0x20000
BLK77_STRT=0xd8000
BLK77_LEN=0x20000
BLK78_STRT=0xda000
BLK78_LEN=0x20000
BLK79_STRT=0xdc000
BLK79_LEN=0x20000
BLK80_STRT=0xde000
BLK80_LEN=0x20000
BLK81_STRT=0xe0000
BLK81_LEN=0x20000
BLK82_STRT=0xe2000
BLK82_LEN=0x20000
BLK83_STRT=0xe4000
BLK83_LEN=0x20000
BLK84_STRT=0xe6000
BLK84_LEN=0x20000
BLK85_STRT=0xe8000
BLK85_LEN=0x20000
BLK86_STRT=0xea000
BLK86_LEN=0x20000
BLK87_STRT=0xec000
BLK87_LEN=0x20000
BLK88_STRT=0xee000
BLK88_LEN=0x20000
BLK89_STRT=0xf0000
BLK89_LEN=0x20000
BLK90_STRT=0xf2000
BLK90_LEN=0x20000
BLK91_STRT=0xf4000
BLK91_LEN=0x20000
BLK92_STRT=0xf6000
BLK92_LEN=0x20000
BLK93_STRT=0xf8000
BLK93_LEN=0x20000
BLK94_STRT=0xfa000
BLK94_LEN=0x20000
BLK95_STRT=0xfc000
BLK95_LEN=0x20000
BLK96_STRT=0xfe000
BLK96_LEN=0x20000
BLK97_STRT=0x100000
BLK97_LEN=0x20000
BLK98_STRT=0x102000
BLK98_LEN=0x20000
BLK99_STRT=0x104000
BLK99_LEN=0x20000
BLK100_STRT=0x106000
BLK100_LEN=0x20000
BLK101_STRT=0x108000
BLK101_LEN=0x20000
BLK102_STRT=0x10a000
BLK102_LEN=0x20000
BLK103_STRT=0x10c000
BLK103_LEN=0x20000
BLK104_STRT=0x10e000
BLK104_LEN=0x20000
BLK105_STRT=0x110000
BLK105_LEN=0x20000
BLK106_STRT=0x112000
BLK106_LEN=0x20000
BLK107_STRT=0x114000
BLK107_LEN=0x20000
BLK108_STRT=0x116000
BLK108_LEN=0x20000
BLK109_STRT=0x118000
BLK109_LEN=0x20000
BLK110_STRT=0x11a000
BLK110_LEN=0x20000
BLK111_STRT=0x11c000
BLK111_LEN=0x20000
BLK112_STRT=0x11e000
BLK112_LEN=0x20000
BLK113_STRT=0x120000
BLK113_LEN=0x20000
BLK114_STRT=0x122000
BLK114_LEN=0x20000
BLK115_STRT=0x124000
BLK115_LEN=0x20000
BLK116_STRT=0x126000
BLK116_LEN=0x20000
BLK117_STRT=0x128000
BLK117_LEN=0x20000
BLK118_STRT=0x12a000
BLK118_LEN=0x20000
BLK119_STRT=0x12c000
BLK119_LEN=0x20000
BLK120_STRT=0x12e000
BLK120_LEN=0x20000
BLK121_STRT=0x130000
BLK121_LEN=0x20000
BLK122_STRT=0x132000
BLK122_LEN=0x20000
BLK123_STRT=0x134000
BLK123_LEN=0x20000
BLK124_STRT=0x136000
BLK124_LEN=0x20000
BLK125_STRT=0x138000
BLK125_LEN=0x20000
BLK126_STRT=0x13a000
BLK126_LEN=0x20000
BLK127_STRT=0x13c000
BLK127_LEN=0x20000
BLK128_STRT=0x13e000
BLK128_LEN=0x20000
BLK129_STRT=0x140000
BLK129_LEN=0x20000
BLK130_STRT=0x142000
BLK130_LEN=0x20000
BLK131_STRT=0x144000
BLK131_LEN=0x20000
BLK132_STRT=0x146000
BLK132_LEN=0x20000
BLK133_STRT=0x148000
BLK133_LEN=0x20000
BLK134_STRT=0x14a000
BLK134_LEN=0x20000
BLK135_STRT=0x14c000
BLK135_LEN=0x20000
BLK136_STRT=0x14e000
BLK136_LEN=0x20000
BLK137_STRT=0x150000
BLK137_LEN=0x20000
BLK138_STRT=0x152000
BLK138_LEN=0x20000
BLK139_STRT=0x154000
BLK139_LEN=0x20000
BLK140_STRT=0x156000
BLK140_LEN=0x20000
BLK141_STRT=0x158000
BLK141_LEN=0x20000
BLK142_STRT=0x15a000
BLK142_LEN=0x20000
BLK143_STRT=0x15c000
BLK143_LEN=0x20000
BLK144_STRT=0x15e000
BLK144_LEN=0x20000
BLK145_STRT=0x160000
BLK145_LEN=0x20000
BLK146_STRT=0x162000
BLK146_LEN=0x20000
BLK147_STRT=0x164000
BLK147_LEN=0x20000
BLK148_STRT=0x166000
BLK148_LEN=0x20000
BLK149_STRT=0x168000
BLK149_LEN=0x20000
BLK150_STRT=0x16a000
BLK150_LEN=0x20000
BLK151_STRT=0x16c000
BLK151_LEN=0x20000
BLK152_STRT=0x16e000
BLK152_LEN=0x20000
BLK153_STRT=0x170000
BLK153_LEN=0x20000
BLK154_STRT=0x172000
BLK154_LEN=0x20000
BLK155_STRT=0x174000
BLK155_LEN=0x20000
BLK156_STRT=0x176000
BLK156_LEN=0x20000
BLK157_STRT=0x178000
BLK157_LEN=0x20000
BLK158_STRT=0x17a000
BLK158_LEN=0x20000
BLK159_STRT=0x17c000
BLK159_LEN=0x20000
BLK160_STRT=0x17e000
BLK160_LEN=0x20000
BLK161_STRT=0x180000
BLK161_LEN=0x20000
BLK162_STRT=0x182000
BLK162_LEN=0x20000
BLK163_STRT=0x184000
BLK163_LEN=0x20000
BLK164_STRT=0x186000
BLK164_LEN=0x20000
BLK165_STRT=0x188000
BLK165_LEN=0x20000
BLK166_STRT=0x18a000
BLK166_LEN=0x20000
BLK167_STRT=0x18c000
BLK167_LEN=0x20000
BLK168_STRT=0x18e000
BLK168_LEN=0x20000
BLK169_STRT=0x190000
BLK169_LEN=0x20000
BLK170_STRT=0x192000
BLK170_LEN=0x20000
BLK171_STRT=0x194000
BLK171_LEN=0x20000
BLK172_STRT=0x196000
BLK172_LEN=0x20000
BLK173_STRT=0x198000
BLK173_LEN=0x20000
BLK174_STRT=0x19a000
BLK174_LEN=0x20000
BLK175_STRT=0x19c000
BLK175_LEN=0x20000
BLK176_STRT=0x19e000
BLK176_LEN=0x20000
BLK177_STRT=0x1a0000
BLK177_LEN=0x20000
BLK178_STRT=0x1a2000
BLK178_LEN=0x20000
BLK179_STRT=0x1a4000
BLK179_LEN=0x20000
BLK180_STRT=0x1a6000
BLK180_LEN=0x20000
BLK181_STRT=0x1a8000
BLK181_LEN=0x20000
BLK182_STRT=0x1aa000
BLK182_LEN=0x20000
BLK183_STRT=0x1ac000
BLK183_LEN=0x20000
BLK184_STRT=0x1ae000
BLK184_LEN=0x20000
BLK185_STRT=0x1b0000
BLK185_LEN=0x20000
BLK186_STRT=0x1b2000
BLK186_LEN=0x20000
BLK187_STRT=0x1b4000
BLK187_LEN=0x20000
BLK188_STRT=0x1b6000
BLK188_LEN=0x
I52=[Download_Data]
BIN2IRD_ACTION=CODEDOWNLOAD
TARGET_CONFIG=R:\manucfg\UEC\X35\UECX_X35.cfg
LOAD_VERSION=30
KEYVERSION=0
SYSID=287
KEYID=281
KEY_ON_DISKS=YES
SIGNED=yes
PAUSECHECK=no
VARIANT=287
[Input_Files]
FILE_COUNT=1
FLASH_FILE=O:\source\uec\Optus DSO\X35\dsd4121_final_2_11_066001597.bin
FLASH_COMPRESS=YES
FLASH_OBSCURE=YES
[Output_Control]
OUTFILE=UEc211030.S35V11f
I98=cbrgerakr
I99=LastTextItem
#Tšžw
Last edited by earlsdon; 15-01-11 at 03:59 PM. Reason: More info
I find it rather curious to have an update done this way as there are going to be a legion of users who havent got the internet, either no computer or its only for Porno and dont have a clue about updating anything or want to !!!.
They do constant updates OTA so why not just do it that way and be done with it??
I am presuming the UEC like a PayTv stb can receive updates even when 'OFF' (Standby)so long as it hasnt been turned off at the powerpoint.
I stand unequivicably behind everything I say , I just dont ever remember saying it !!
Looks like a wild polished turd chase to me.
If it's worth having it will be OTA, Gordan's right, most users couldn't do a USB software/firmware upgrade.
It would be very expensive to have the installer come & do it for you.
Last edited by Tiny; 15-01-11 at 07:30 PM.
I somewhat disagree.
Companys like Strong have been posting firmware updates online for quite some time.
You download it, plug your memory stick in the USB port, and use the menu's to update the firmware. Worked for me every time.
I've had customers stuff it up, so you simply plug a null-modem cable in the serial port and upload correct firmware from your PC.
Sure a legion of users don't know how, but what's wrong with giving the rest of us the option that do know how, so you can update your firmware to rectify bugs (like bl**dy reboots) and add new functions.
Obviously UEC wouldn't bother posting it online otherwise??
Id rather go through that exercise than having my box rebooting in the middle of something I'm trying to watch while doing an unnecessary OTA update that was done 10 minutes earlier... and probably again 15 minutes later!
If OTA updates could be set to be done manually (which is obviously in the pipeline) or only while the unit is in Standby, it would make life so much easier.
If other manufacturers can make it work, why then so complicated for UEC?...
Bookmarks