Try booting with the adapter connected
If you cant connect in the menu see if you have the hardware working
Telnet into the F9000
Use the login root
type /etc/init.d/wireless stop
type /etc/init.d/wireless start
has anyone got the F9000 to work on a wireless network? I have a TP-Link TL-WN321G 54M network adaptor which is supposed to the the correct one (correct chipset) but it isn't recognised for some reason.
Look Here -> |
Try booting with the adapter connected
If you cant connect in the menu see if you have the hardware working
Telnet into the F9000
Use the login root
type /etc/init.d/wireless stop
type /etc/init.d/wireless start
LeroyPatrol (17-01-11),wazm (17-01-11)
Also check it seen on the usb bus.
use
cat /proc/bus/usb/devices
also if you look in the wireless script you will find the driver types are
rt73, rt2870 and zd1211
so /proc/bus/usb/devices will show ones of these if the driver is loaded
you can cut that down by piping the results to grep with
/proc/bus/usb/devices | grep rt
and
/proc/bus/usb/devices | grep zd
LeroyPatrol (17-01-11),wazm (18-01-11)
Here's the wireless setup doc for the 980 which is the same
I also found some nice right angle USB adapters on ebay.
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
Tried that and got this.
cat /proc/bus/usb/devices | grep rt
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 1
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh= 1
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 2
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
Does this mean we have a driver? Doesn't look like it to me.
This does though
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=148f ProdID=2070 Rev= 1.01
S: Manufacturer=Ralink
S: Product=802.11 g WLAN
S: SerialNumber=1.0
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=450mA
I: If#= 0 Alt= 0 #EPs= 7 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
Bookmarks