strong 4930 & cccam

[Strada916]

Yeah i did all that but when u save the settings and go back to list, status still says disconnected....
so what do u do after that....how do u scan channels?

once you have the server details you need to press the red button or turn the connection on.

the details should look somethink like this

User: guest
pass: guest
des key 123456789123456789123456789123
Address: 123.123.1.0
port:1230


these deials are fictious
P.S. You will need a working server for this to work. See you server administrator if you are not sure.

[notorious.jatt]

once you have the server details you need to press the red button or turn the connection on.

the details should look somethink like this

User: guest
pass: guest
des key 123456789123456789123456789123
Address: 123.123.1.0
port:1230


these deials are fictious
P.S. You will need a working server for this to work. See you server administrator if you are not sure.

Got it to work....do you how can connect this box to pc via ethernet cable...so that i can add cline etc via computer or set up my own cccam server...
Thanks

[Strada916]

Got it to work....do you how can connect this box to pc via ethernet cable...so that i can add cline etc via computer or set up my own cccam server...
Thanks

Well the 4930 will not run as a server, but it will happily be a client all day.

What you need to do is insert a USB stick and then goto menu>usb>data transfer then hit coloured with csinfo. Now take the usb stick to a PC edit the lines you need to edit save them and then re-insert the USB stick. go back to the above menu setting and now click ok on the file it will then upoad the cs details. I am going off memory here as the box is a friends house. I'll have look tomorrow and give you the exact low down

[Krueger]

Will be picking one of these up next week for $195, looking forward to getting it home and having a blind scan.

[Nigel]

I have loaded new firmware and module file and put all correct details into 4930 but cannot get it to connect.
Has anyone else had this problem?
Also im chasing an updated channel list if anyone can post one.

Cheers

[Strada916]

I have loaded new firmware and module file and put all correct details into 4930 but cannot get it to connect.
Has anyone else had this problem?
Also im chasing an updated channel list if anyone can post one.

Cheers

Nigel

Please elaberate a bit more. you have gone into 8281 and set the details to log onto the server?

You then need to make sure the on/off is set to on. then make sure the ip settings are correct through the main menu. then make sure that you press the red button once inside 8281

[Nigel]

Yep thats exactly what ive done. Have set up another strong 4910 with same deal and no problems. How long can it take to get a connection? Should be within seconds hey?

[Strada916]

Yep thats exactly what ive done. Have set up another strong 4910 with same deal and no problems. How long can it take to get a connection? Should be within seconds hey?

Yes it should, what channel you on? Also when you are in 8281 you can almost make out the NDS with it is connected. Do you have two different log on account on the server you are using ?

As most servers will not allow multiple log ons

[notorious.jatt]

Yep got it to connect to cccam....any new firmware available for this box to improve cccam operation???

[networkD]

I'm using a Bluey with my 4930 and it freezes after using the card after around 15 mins, it then goes to scrambled channel/invalid smartcard.
I have added the patched firmware but that didn't make any difference.
Is there anyway to overcome this problem ?

[notorious.jatt]

what is bluey???? sorry if it is a dumb question.....

[networkD]

$oxtel blue card...

[Strada916]

I'm using a Bluey with my 4930 and it freezes after using the card after around 15 mins, it then goes to scrambled channel/invalid smartcard.
I have added the patched firmware but that didn't make any difference.
Is there anyway to overcome this problem ?

Blueys do not really work well with 4930 or any 49xx series you need an ogrange with box id etc

[lunsat]

Yep got it to connect to cccam....any new firmware available for this box to improve cccam operation???

What version firmware did you load? version 108p is the latest available.

[notorious.jatt]

I got SRT4930_ALL_106p_20110112..
so whats new in 108p and from where can i download it..
Thanks

[lunsat]

Check here:

[notorious.jatt]

do anyone knows if there is any new version cccam available for this receiver..

[notorious.jatt]

Strong 4930 has cccam 2.0.11...does anyone know how new version cccam can be installed..
also i have new software SRT4930_ALL_112p_20110414.zip this add use tube and online radio etc but has bug in recording..freezes when u stop..

[LeroyPatrol]

recording bugs on a Strong receiver? Never seen that before
Cccam is embedded in the firmware so you can't just change the cam. You need to wait until it's added to the firmware and recompiled. But why do you need to change it? I've found the cs side of things to work well in the past. This is the only disadvantage of this type of box compared to one where you can download the emus or add plugins.

Leroy

[toyboy11]

I don't believe you Leyroy on that Strong recording problem, you are joking of course.