Does anyone know how to copy firmware from strong srt 4910 box to box using a cable and no P.C.?
Does anyone know how to copy firmware from strong srt 4910 box to box using a cable and no P.C.?
Anybody please explain the values to enter in server list menu for SRT 4910:
E.g Timeout = 3s
Filtermode; ......What to filter?
Will these affect the performance? This is because I see it takes somewhat long to switch between some channels. It stays scrambled for quite long on certain channels. I'm on CCcam but nearly same menu as below..
Last edited by patmos; 06-06-11 at 01:44 AM. Reason: addition
taree (09-01-12)
Filter is to filter out specific card so when you press 8281 from remote cccam and newcamd lines manager shows up...
now press info button to bring out filter setting...
first filter will be filter 0
add CAID and provider of the all the card you need in list....
press fastforward button to go to next filter and add details...
i think upto 9 filters can be set up...
now go back to any cline and change filter mode to user and select from filter list filter number you added caid and providers and save...
timeout is maximum time receiver will wait for requested code from cline or nline server...
after that it give up...
yopu can set it upto 14 sec max
hope this help and that is what i think it means...if anyone has another opinion please reply...
Last edited by notorious.jatt; 09-06-11 at 08:25 PM.
taree (09-01-12)
Hey Guys,
I got my 4910 working with cccam after loaded the patched firmware and module. However, I found that if I only use one cccam account, it works fine. If I open two or more cccam account, the box just keeps rebooting and not stopping. Anyone have an idea why is that? Is there anything deal with the setting I put into the cccam setting? Thanks
@all pls am new here i have strong4669z,how do i use cccam on it,wat r d step i iwill follow.i need full toutorial on cccam pls
OSIRUS (12-01-12)
After googling strong4930 clone list i cant find anything.can anybody have info about clone models ?
I originally got the 4910 file compliments to the above poster, installed it using it as a client to an oscam server, took about 5 mins
As the bluey is now non functioning and am trying to run it as a client to an IRserver computer with no luck.
Previously i did not have to enter a server ip (i think) but do i have to do this now? And if i have to enter lines into CCcam how do you do it
tried both CCcam and Newcs. The DM500's were easy thru DCC, any help would be appreciated
There is a fine line between "Hobby" and "Madness"
Set it up as a newcamd client entering the username, password, DES key, IP address and port and save and connect and you should be away.
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
Hi will this image support the red dragon card as well as the cs feature
These boxes will act as a client only. But they do read the card in the slot
wazza811 (14-01-12)
Bookmarks