Hi Guys,
anyone has a UBI card working in oscam (only 1 channel to share).
i'm getting this error "irdeto_do_cmd [2] 90 00" then timeout.
using mgcamd as client
cheers
Hi Guys,
anyone has a UBI card working in oscam (only 1 channel to share).
i'm getting this error "irdeto_do_cmd [2] 90 00" then timeout.
using mgcamd as client
cheers
Look Here -> |
im getting the same error , still trying to work it out as well , restarting oscam fixes it , but after a few/couple of hours , does it again. tried 3 other readers and tweaking the reader settings and oscam.conf with no luck , even tried dm500 , dm800 , linux version of oscam , all seem to fail in some way. The only real difference is that linux doesnt crash where dm 500 and dm 800 do
where is my tinfoil hat?
maybe a flood of emm's to the card ? block all the emms to the card except one box.. ? just taking a guess!
AU is off, have tried this already, same thing
where is my tinfoil hat?
Emms from another provider ( ie resharing to CCcam )will give that or the card has missed an update. Block global emms to start with.
DM500s Black with rear on/off switch $99 inc post , DM800 sim 82 $250 inc post, DM800SE $310 inc
yea i blocked all global emm and even have AU disabled under reader . this is the only solution atm , seems to run longer , 6 to 8 hours before the irdeto cmd error apears.
I have read that it seems to be common with later builds of oscam, but im getting the same problem with irserver as well, CW goes red at weird times and a reset is required
where is my tinfoil hat?
I am getting the same problem, channel runs for 6 to 8 hours and then error I am getting
" not found irdeto_do_cmd [2] 9e 00
not found irdeto_do_cmd [2] 90 00"
I try to update card but no luck.
When I plug card in original decoder it works in 4-5 seconds and the replug in oscam the again work for next 6-8 hours and after that same problem.
" not found irdeto_do_cmd [2] 9e 00
not found irdeto_do_cmd [2] 90 00"
I am running only single user
Please help....
I need help about irdeto card share. My card problem is, I can't share more than 3 channels. When i use more than 3 channels then ecm not found.
ok seems i have sorted the problem , i was getting a simular error to "irdeto_do_cmd [2] 90 00" with out the 90 00 (nok) message but just the "irdeto_do_cmd [2]" ( I over looked this in the threads' title )
even with AU disabled in oscam under the reader settings , oscam was still been bombarded with emm's and causing errors from the other client lines through a CCcam reshare. I moved CCcam to ubuntu , Disable emm = yes in CCcam.cfg and setup a single box with CCcam using newcamd protocol to keep the card updated. All better ... so far after 2 days
Last edited by theriddler_1; 09-03-11 at 08:09 PM. Reason: I = A
where is my tinfoil hat?
Having the same problem. Have two clients (one locally for CCCam) and the other on another box. Works for a few minutes, then drops out.
This is the errors I am having.
22 1851 2B278500 c bedroom (0604&XXXXXX/0BB9/44:C0BA): not found (178 ms) (of 1 avail 1) - FOX Sports 1 (irdeto_do_cmd [8] a0 00)
2011/04/22 1852 2B278500 c bedroom (0604&XXXXXX/0BB9/44:A862): not found (141 ms) (of 1 avail 1) - FOX Sports 1 (irdeto_do_cmd [2] 90 00)
2011/04/22 1859 2B127500 c lounge (0604&XXXXXX/1B62/44:BD9D): not found (178 ms) (of 1 avail 1) - Discovery +2 (irdeto_do_cmd [8] a0 00)
North Melbourne Football Club Membership 2012 - http://membership.kangaroos.com.au/
IGNITE!! 2012!! GO NORTH!
Support Hey Hey it's Saturday for 2011/2012! http://www.facebook.com/heyheyitssaturday
Don't forget to say Thanks for useful posts!!!
Any idea how I can do that OZir? Will that interupt my viewing too? I could set it up to restart oscam every 5mins perhaps without rereading the card etc...
At the moment when I have two clients, I get errors. One is fine.
North Melbourne Football Club Membership 2012 - http://membership.kangaroos.com.au/
IGNITE!! 2012!! GO NORTH!
Support Hey Hey it's Saturday for 2011/2012! http://www.facebook.com/heyheyitssaturday
Don't forget to say Thanks for useful posts!!!
Can the provider switch off surf lock remotely? Or is it done permanently at activation? Thinking of a phone call.
North Melbourne Football Club Membership 2012 - http://membership.kangaroos.com.au/
IGNITE!! 2012!! GO NORTH!
Support Hey Hey it's Saturday for 2011/2012! http://www.facebook.com/heyheyitssaturday
Don't forget to say Thanks for useful posts!!!
North Melbourne Football Club Membership 2012 - http://membership.kangaroos.com.au/
IGNITE!! 2012!! GO NORTH!
Support Hey Hey it's Saturday for 2011/2012! http://www.facebook.com/heyheyitssaturday
Don't forget to say Thanks for useful posts!!!
Hi SG,
Do you find a solution to this? I'm getting the same error.
North Melbourne Football Club Membership 2012 - http://membership.kangaroos.com.au/
IGNITE!! 2012!! GO NORTH!
Support Hey Hey it's Saturday for 2011/2012! http://www.facebook.com/heyheyitssaturday
Don't forget to say Thanks for useful posts!!!
Maybe try CSP to oscam. Only one N line to oscam.
DM500s Black with rear on/off switch $99 inc post , DM800 sim 82 $250 inc post, DM800SE $310 inc
SatGuRu (28-04-11)
Where can I get CSP from? PM?
CCCam uses one N line too, but don't think it will fix my problem. Was thinking if the provider can switch it off remotely I could ring their tech support and "complain" I lose my pictures while channel surfing for a while.....hmm...
North Melbourne Football Club Membership 2012 - http://membership.kangaroos.com.au/
IGNITE!! 2012!! GO NORTH!
Support Hey Hey it's Saturday for 2011/2012! http://www.facebook.com/heyheyitssaturday
Don't forget to say Thanks for useful posts!!!
DM500s Black with rear on/off switch $99 inc post , DM800 sim 82 $250 inc post, DM800SE $310 inc
Thanks,
I'll give it a try, but it needs to slow down the ECM requests to the card.
North Melbourne Football Club Membership 2012 - http://membership.kangaroos.com.au/
IGNITE!! 2012!! GO NORTH!
Support Hey Hey it's Saturday for 2011/2012! http://www.facebook.com/heyheyitssaturday
Don't forget to say Thanks for useful posts!!!
Bookmarks