Mysat Intlesat8
EMM PID: 0500
Seperator: 8240
I want to have a play with some old Mysat files and some log details may be useful.
Does anyone here have the PID details for logging Mysat ?
Look Here -> |
Mysat Intlesat8
EMM PID: 0500
Seperator: 8240
When you do things right, people won't be sure that you have done anything at all
Hi Best4less
Are you sure about these settings? I have tried these but I can not get them to work.
My setup should be good as I can log Austar on C1 with no problems.
Would you have settings for Jade as I will also try that.
try,
EMM PID: 0500
Seperator: 8270
Last edited by OSIRUS; 13-03-11 at 10:51 AM.
Become a Premium Member and support the Austech Forum
My bad :P
PID could be 0x500 or 0500
When you do things right, people won't be sure that you have done anything at all
OK I have tried all the suggestions with no success.
I will give up for the moment however I would love to hear from anyone who has this working - I have been using Ird Extract OK logging Austar recently... and I have logged select OK in the past as well.
I knew something was not right -so how does one find the right settings if they have changed
try 0502
8270 be patient .
Mysat is a slow one and there are only a handfull of lucky numbers that survived the last raffle.
DM500s Black with rear on/off switch $99 inc post , DM800 sim 82 $250 inc post, DM800SE $310 inc
Thanks - I have set this up again this morning however I am yet to see any logging happenning. When I view the miscellaneous log it is constantly attempting to connect cycling through messages like below.
19 Mar 2011 20:14:52 Attempting to connect to 192.168.1.107:31338
19 Mar 2011 20:14:53 TCP Socket Error
19 Mar 2011 20:14:53 Sending HTTP Header
19 Mar 2011 20:14:53 TCP Socket Error
19 Mar 2011 20:14:53 Not Connected
19 Mar 2011 20:14:53 Attempting to connect to 192.168.1.107:31338
19 Mar 2011 20:14:54 TCP Socket Error
19 Mar 2011 20:14:54 Sending HTTP Header
19 Mar 2011 20:14:54 TCP Socket Error
19 Mar 2011 20:14:54 Not Connected
Now my setup is right because if I switch to say Austar I can log that no worries. Switch back to PAS 8 I receive signal e.g. the Arab Channel but I get the above constantly?
BTW I am not looking for any specific HSN in the stream.. more so to just get a good log so I can see if I can play around with some old files for learning (btw please pm me if anyone has anything that may be useful)
My thoughts are that the PID and seperator values are not correct. Please, if anyone has anything ...I am all ears.
.
Last edited by checkitout; 19-03-11 at 08:34 PM. Reason: typo and grammar
I have also heard one report of,
EMM PID: 0501
Seperator: 8270
for Mysat (unconfirmed)
Become a Premium Member and support the Austech Forum
I just Logged for 2 Hours with EMK logger and the PID 0500 and Sep 8240 (UBI?)
Seems to be working I see a lot of 1030 EMK's tho
CB97xxxx00001030A8EB05D20C29596AE715C6C40087F2B148 4CD270039C83DBADE25CAD8E18F9C2AB6788C6CD29A22AB0C1 44C121B63589
CB97xxxx00001030CC8F856E3CF41C9A55BFCF1E9EE3746B5F 15476CD5473C1DEE86496F81DAC7DC89106C3D03C33AD4E454 28544024ADB0
CB97xxxx00001030EB4B6170685528C8853B9D75716AE7E49C A521A5B1965B268B1C38F03333C41E07D5F78B641A0289C975 AB7F89922DCF
CB97xxxx00001030DC500EBE5E4A2117A75569878D103A0EFE 510581DAC0D6885CE10ABA57077D9F73C46C39F7A2FBCD5971 4E67F6B9A119
CB97xxxx00001030667C7BCCF2054BD1F2E1A43A3CE986F086 3650EAA91DFA835517D02494FAF674B602782C4ACB72E05AB8 30702B5D3BAF
CB97xxxx000010303C226F99F0651969AFE8A49D89A15D15C6 EB937623CE7B41DDC6D165FD3D5E2B00E81907C998C9763CE8 5B69EB01AE36
CB97xxxx000010302C40FE2B31E0F502B7ED335BB053D2ABA2 BC385E998C478427F8FB66DFEFBE40FCB712231502C0E154CA E1E1A0032DCA
Last edited by INFO; 19-03-11 at 08:43 PM.
OSIRUS (19-03-11)
With A dreambox the Simple way to find the CaPID (Logging Pid) is to install the plugin Cryptinfo
Uploaded with
I have installed the crptoinfo plugin and unfortunately the best i get out of it is "no info FTA" or "unable to decode"
Any other ideas to find the correct logging parameters for MySat or any other Providers on PAS 8 ?
use the pid logger
mysat log
MYSAT PID is 0500 use 0x500
PanGlobal PID is 0501
jade PID is 0500 pid logger wont work
Select PID is 0500
you can also use the X or X0 for all Prov PID,,,,, 0x500 or 0x0500
make sure you put it on the Prov channel that you are logging....
Last edited by gin; 31-03-11 at 11:44 PM.
Great Post Gin
Will come in handy for future reference
When you do things right, people won't be sure that you have done anything at all
I loaded an old mysat bin to a whitey, but cant find any log for the HSN.
So I just put it in a Strong 4668x and Rai shows pics.
No other channels from same provider or transponder show pics.
When you take card out Rai becomes scrambled.
Tried same card in Humax 5410z and says invalid card.
I guess its a non-tweaked bin file??
Bookmarks