looks like someone sold you a single polarity lnb!!!! get a new one and ask for dual polarity!!!!
Just been playing around with tuner configuration on my STB & fined out can't lock up signal on all horizontal transporders on C1/D3.
Somebody have any idea that my LNB became faulty or may be settings?
All vertical transporders locking just fine.
VLADI
Look Here -> |
looks like someone sold you a single polarity lnb!!!! get a new one and ask for dual polarity!!!!
No it was working fine for a few years(dual pol-100%)
cro69
How about NSS-6 in Melbourne? Does it work?
yes it does
I've try last time, but can't catch any transporder.
What settings & hardware do you use for that?
It was working for me about 3 years ago or so.
Last edited by VLADI; 17-03-11 at 10:36 PM.
it was 8 years ago cant remember im sure theres someone on here that does!!!what you want to watch on there anyway??
According to LyngSat- Pentagon Channel [LyngSat Address] [LyngSat Stream] [LyngSat Free TV] 8 1860 1820 E, but looks like it is gone.
how on earth did you become a premium member after 24 posts whose ass you been kissing???lol
G'Day Cobber,
If its been going for a few years, I venture to say that you have a 11300 LNB
Since the launch of D3, many channels have migrated to D3 for which you require a 10700 LNB. Preferably a 10700 Twin/Dual output LNB.
You then need to change your LNB configuration in the STB.
Kindest Regards, " The Druid ".
Last edited by beer4life; 18-03-11 at 02:24 PM.
VLADI (18-03-11)
beer4life
Thank's,but I think it is something else. Lnb I've used- 10700 Ku Twin V+H.
VLADI
Which polarity uses 13V and which is 18V ?
There is a possiblity that A/ the LNB cant switch because its faulty or B/the problem is in the STB.
A remote possibity is a problem in the connection at LNB end like moisture ingress.
A friend had one die as the day got warmer , worked ok at night or when it rained but eventualy it had to be replaced.
If I have read your post correctly the LNB is several years old so it may just be time to be retired.
The simplest way of testing is to try a known working STB on the LNB and see what happens unless you have other testing gear available.
Last edited by gordon_s1942; 18-03-11 at 09:09 AM.
I stand unequivicably behind everything I say , I just dont ever remember saying it !!
VLADI (18-03-11)
STB brandnew, so I think it is LNB problem,will try it with another STB.
Thank's
VLADI
make sure the skew is correct on your lnb
may have come loose or been moved by a bird landing on it
the crows around here are using my dishes as a roost
The power of accurate observation is commonly called cynicism by those who have not got it.
OK one problem gone. All transporders-V/H locking on C1/D3.
Was faulty Lnb.
VLADI
i think say i did say to change it in my 1st post!!!!lol
Bookmarks