New neumo image for Relook 400

**jgm** · 20-04-11, 06:52 PM

The new neumo3.4.2 will be released in the next few weeks. There is a new database especially for Australia, & with luck the full 7 day EPG (similar to CrossEPG). I've been using the beta releases of this version as they've been coming out, and am about to test the latest which has the candidate Australian F*xtel EPG.

**weirdo** · 20-04-11, 07:37 PM

Thanks for the heads up jgm and be sure to let us know when it's released into the wild.
I'm pretty happy with PLi but will definitely have a go at Neumo

**Kavakid** · 15-05-11, 10:41 AM

hey jgm - any further development on this?

cheers

**Kavakid** · 15-05-11, 12:07 PM

Found it - the oz database is here too

**jgm** · 15-05-11, 02:51 PM

I'm still trying to get access to the neumo svn server. The extended EPG isn't working yet & deeptho wants us to look at the source to find the problem.

Also, I had some issues with the Australian database, although I didn't try to load it into pceditor & upload to the 400 - just added Optus c3/d1 into the existing db with sqlite3.

**Kavakid** · 15-05-11, 03:09 PM

Yes, I just read the posts between you two over on dentenk, you been working hard, jgm.

I spent a couple of hours just now trying to update with no success so gone back to

Neumo version FT2.13.6R2+Extras_by_rizla which is the most stable for me with dual tuners. It still has bad hair days though.

**jgm** · 15-05-11, 06:19 PM

Download relook400s.usb_kernel_root_db.img.3.4.2.pal.r4087 & db.dat.australia.r4087.
Add .img extension to the image file. Change the 400s to factory default settings (I didn't do this, & had to go through a lot of hassles - needed to get a shell via the serial interface & delete all .dat's). Flash with flash tools (I didn't have any success with pceditor).

When the box has rebooted, load the oz.db into pceditor and save to the 400. You should then be able to scan Optus C3/D1

This image is the best I've seen so far, & as long as you only want now/next EPG is fine. I haven't tried oscam in it though, as I'm serving from my vu+.

**spence** · 12-06-11, 02:53 PM

Originally Posted by jgm

....
When the box has rebooted, load the oz.db into pceditor and save to the 400. You should then be able to scan Optus C3/D1
.

When I try and load the oz.db.dat into PC-Editor 1.2.60 (latest I could find) it says not supported?
How did you get around this?
Thanks.

**jgm** · 12-06-11, 03:12 PM

This is the version of PCEditor I use with neumo3.4.2

This is the description I got from the developer:
"test-editor
but some things are not working, like lnb-settings.

first installing normal pc-editor
then replace pceditor.exe with enclossed file (rename to pceditor.exe)"

**radoslavv** · 20-01-14, 07:13 PM

Originally Posted by jgm

This is the version of PCEditor I use with neumo3.4.2

This is the description I got from the developer:
"test-editor
but some things are not working, like lnb-settings.

first installing normal pc-editor
then replace pceditor.exe with enclossed file (rename to pceditor.exe)"

Hello,
could you please paste or PM pceditor file you have mentioned - download link is not working :-(.
thanks