Hi all,
Are Ford Falcon wheels interchangeable with a holden commodore.?
I have a falcon and want to buy a couple of spare tyres/including rims for a long journey.
thanks
Buy cheap and pay often, - there is no substitute for stupidity.
You wipe your bum after each crap, why don't you clean your teeth after every meal?
There is no shame in being uneducated nor in being stupid.
The true shame lies in knowing that you are and doing nothing about it.
Only the living worry about dying.
To the tobacco addicts - Smoke more and die sooner, so I can breathe fresh air. Thank you.
Education is the only sure cure for religion
Look Here -> |
Falcon and Commodore rims are NOT interchangable...
Falcon 114.3 x 5 offset +36
Commodore 120 x 5 offset +40 (I think)
Falcon (AU onwards) are interchangeable with Toyota, Nissan, Mazda, Mitsubishi, maybe more
Commodore are interchangable with BMW..maybe more..
The PCD is different.
FORD FALCON AU> 5X114.3
FORD FALCON PRE AU 5X114.3
HOLDEN COMMODORE VB 5X120
HOLDEN COMMODORE VC 5X120
HOLDEN COMMODORE VH 5X120
HOLDEN COMMODORE VK 5X120
HOLDEN COMMODORE VL 5X120
HOLDEN COMMODORE VN 5X120
HOLDEN COMMODORE VG 5X120
HOLDEN COMMODORE VP 5X120
HOLDEN COMMODORE VQ 5X120
HOLDEN COMMODORE VR 5X120
HOLDEN COMMODORE VS 5X120
HOLDEN COMMODORE VT 5X120
HOLDEN COMMODORE VU 5X120
HOLDEN COMMODORE VX 5X120
HOLDEN COMMODORE VY 5X120
HOLDEN COMMODORE VZ 5X120 48
HOLDEN COMMODORE VE 5X120
HOLDEN CREWMAN 5X120
HOLDEN MONARO (New) 5X120
What PCD suits the Falcons?
5 X 114.3
CHRYSLER JEEP CHEROKEE <99 5X114.3 35 71.5
CHRYSLER JEEP GRAND CHEROKEE <99 5X114.3 35 71.5
CHRYSLER VOYAGER 5X114.3 35 71.5
DAEWOO LEGENZA 5X114.3 35-42 56.5
DAIHATSU TERIOS 5X114.3
FORD FALCON AU> 5X114.3
FORD FALCON PRE AU 5X114.3
FORD LASER SR2 5X114.3
FORD PROBE 88-92 5X114.3 59.6
FORD PROBE 93-96 5X114.3 67.1
FORD TELSTAR 88> 5X114.3
HONDA ACCORD 01> 5X114.3
HONDA CIVIC TYPE R 5X114.3
HONDA CRV 97> 5X114.3 64.1
HONDA INTEGRA TYPE R 5X114.3
HONDA LEGEND 91> 5X114.3
HONDA NSX 5X114.3
HONDA ODYSSEY 95> 5X114.3 70.3
HONDA PRELUDE 97-01 5X114.3 70.3
HONDA S2000 99> 5X114.3 70.3
HYUNDAI GRANDUER 5X114.3
HYUNDAI SANTA FE 00> 5X114.3 35-45 67.1
HYUNDAI TIBURON 01> 5X114.3
HYUNDAI TRAJET 00> 5X114.3 35-45 67.1
HYUNDAI XG 00> 5X114.3 35-45 67.1
INFINITI I30 95-97 5X114.3 66.1
INFINITI J30 92-97 5X114.3 66.1
INFINITI Q45 90> 5X114.3 66.1
KIA SEDONA 99> 5X114.3 35-42 67.1
KIA CARNIVAL 99> 5X114.3 35-42 67.1
LANDROVER FREELANDER 5X114.3 35
LEXUS ES 300 92> 5X114.3 38-45 60.1
LEXUS GS 300 93> 5X114.3 38-45 60.1
LEXUS GS 400 93> 5X114.3 38-45 60.1
LEXUS GS 430 01> 5X114.3 60.1
LEXUS IS 200 99> 5X114.3 38-45 60.1
LEXUS IS 300 99> 5X114.3 38-45 60.1
LEXUS LS 400 91-94 5X114.3 38-45 60.1
LEXUS LS 430 5X114.3
LEXUS RX 300 00> 5X114.3 38-45 60.1
LEXUS RX 470 92> 5X114.3 38-45 60.1
LEXUS SC 300 92-96 5X114.3 60.1
LEXUS SC 400 91> 5X114.3 35-42 60.1
LEXUS SC 430 5X114.3
MAZDA 3 5X114.3
MAZDA 6 5X114.3
MAZDA 626 88> 5X114.3
MAZDA 929 87> 5X114.3
MAZDA ASTINA V6 5X114.3
MAZDA CX7 5X114.3
MAZDA MPV 5X114.3
MAZDA MX5 05> 5X114.3
MAZDA MX6 5X114.3
MAZDA RX7 87> 5X114.3
MAZDA RX8 5X114.3
MAZDA TRIBUTE 5X114.3
MITSUBISHI 3000GT 5X114.3
MITSUBISHI FTO 5X114.3
MITSUBISHI GRANDIS 5X114.3
MITSUBISHI GTO 5X114.3
MITSUBISHI LANCER CG-CH VRX 5X114.3
MITSUBISHI LANCER EVO 4> 5X114.3
MITSUBISHI MAGNA 90> 5X114.3
MITSUBISHI OUTLANDER 5X114.3
MITSUBISHI STARION TURBO 86-89 5X114.3 67.1
MITSUBISHI VERADA 5X114.3
NISSAN 200SX S14 5X114.3
NISSAN 200SX S15 5X114.3
NISSAN 300ZX 5X114.3
NISSAN 350Z 5X114.3
NISSAN MAXIMA 90> 5X114.3
NISSAN MURANO 5X114.3
NISSAN SKYLINE R32 TURBO 5X114.3
NISSAN SKYLINE R33 TURBO 5X114.3
NISSAN SKYLINE R34 5X114.3
SUBARU SUBARU SVX 5X114.3
SUZUKI GRAND VITARA 05> 5X114.3
SUZUKI SWIFT SPORTS 5X114.3
SUZUKI SX4 5X114.3
TOYOTA AVALON 95-97 5X114.3 60.1
TOYOTA CAMRY 92> 5X114.3
TOYOTA CRESSIDA 89-92 5X114.3 60.1
TOYOTA MR-2 90-92 5X114.3 60.1
TOYOTA MR-2 92-95 5X114.3 60.1
TOYOTA RAV4 5X114.3
TOYOTA SOARER 5X114.3
TOYOTA SUPRA 93-96 5X114.3 60.1
TOYOTA TARAGO 5X114.3
Dont forget to look at the wheel off sets and hub hole sizes.
Why 114.3 you ask....??
Well that's 4.5 inches ofcourse.....dunno why all the jap cars adopted it though
and 120 is 4.75 inches..that what Chev liked to use...
Godzilla (23-04-11)
The bigger the PCD the bigger the peni......
You know the old Chev/Ford argument.
Having said that the larger the PCD the more side load strength and less flex in theory.
The smaller PCD's were adapted by the Japs because smaller hubs discs and drums could be used im guessing.
I was noting the other night that performance Jap versions had either 5 studs instead of 4 or larger PCDs
Mgoldbe1 (23-04-11)
subaru dont fit tarago just tried
IF IT DONT WORK USE A BIGGER HAMMER
have a look under S godzilla subaru is there
IF IT DONT WORK USE A BIGGER HAMMER
Thats the SVX model mate, not all or any Subaru models, just the SVX in particular.
Im not even sure if any exist in AU.....
ahh well sons wrecked rex was sitting there with good tyres and rubber thought i would try them on the family wagon would of looked smick but bummer they are 5x100 damn
IF IT DONT WORK USE A BIGGER HAMMER
There may be (and dont quote me on this) a later version of the Subaru STi that had the larger stud spacing.
Whatever you end up buying, make sure you test one as the rims can hit the brake caliper and the hub holes can be the wrong size too.
Also pay attention to the hub hole, rims should be a tight fit around the hub and not loose as all road shocks should be pushed through the hub and not the wheel studs.
When testing, test both front and back as the calipers and shockers are in different locations and can get in the way, what fits on the front may not fit on the back due to wheel offset.
This is one area I cannot see why a 14 inch 4/5 stud rim wont all other 14 inch 4/5 stud rims.
They cant say its for 'safety' because that infers your 'CanHardly' is using substanded non ASS rims compared to my 'AzizifitwillGo' mobile because the stud pattern is 1/8 diameter bigger.
Bolts are the same, Nuts are the same, threads are the same but not the spacings, bloody ridiculous.
I once fitted 3 totatly different branded Disc calipers to an old Valiant once. I found a wreck where each side front caliper was a different brand to the other but they all fitted not only to a Valiant, but to a Ford as well, only the Hubs were different so if everything on the wishbones was the same, why the different bolt pattern on the rims ?
Even less excuse today as we import everything now so why not a standed Rim pattern?
I have no problem in making the pattern different based in the wheel diameter to stop idiots either going up or down in rim size for the vehicle their fitted to.
Last edited by gordon_s1942; 24-04-11 at 07:28 PM.
I stand unequivicably behind everything I say , I just dont ever remember saying it !!
hey puca, I thought only islanders drove Taragos
weirdo (24-04-11)
Wollongong has Never been the same since the death of the Chrysler Valiant with the fluffy dice dangling from the rear view mirror.
I stand unequivicably behind everything I say , I just dont ever remember saying it !!
Godzilla (25-04-11)
Bookmarks