Those cards dont work anymore since austar made the stream non irdeto compliant .
Satellite: Optus C1 156.0E PID: 0E01 Separator: 8240
Been logging for a while now, using Dreambox EMK logger V2.5. (Hourly logs)
I have had a hit when searching my EMK database for my HSN, I copy the line from the search. Load the full line in to GUP 3.5 and send it to the card. It then responds with EMM not Successful. I understand that the GUP 3.5 always says that it’s not successful, when it is. (From an Austech previous post).
Once the EMK is sent to the card, I have had the card sitting in my strong 4658x, 4653x & Greywolf Midnight server for over 12 hours each. STILL NO PICTURE....
Any Ideas??????
Look Here -> |
Those cards dont work anymore since austar made the stream non irdeto compliant .
Thanks for the reply Crypto !!!
But isnt the PID: 0E01 for Aurora IRD2 ???? Not Poxstar ???
Cheers
Find a different file to load,that should fix your problems
I don't have any files sorry
When you do things right, people won't be sure that you have done anything at all
Thanks best4less for the reply.
Am I right in thinking you are telling me to load a different BIN file on the card than the one i have ?????
I just remember someone saying that they used a different file i guess its a bin if that is what you young guys call it nowadays LOL
When you do things right, people won't be sure that you have done anything at all
You will notice that it also changes the provid 00, after you send the emk (CB) line to your card.
As suggested earlier the stream is not fully complaint to the i*deto "standard stream".
There is no more files period
He's talking about bloody Aurora I2 NOT Austar I2
Cheers
Ted (Al)
emk's are apparently few and far. Don't know what the time frame is between them. Keep logging.
Someone may contact you that's been logging though that could help you out!!
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
Thankyou to everybody for there help.
A kind user pointed me in the direction of changing my card programmer. Then resending logged line through GUP to card, I was using:
Phoenix-Smartmouse programmer, 3.5Mhz/6Mhz, powered by USB.
Then changed over to the CAS3 and sent the same logged line to the card.
Bookmarks