which provider are you targetting?
Humax ToH3.4 HoTplugged v11.0 - 2008-04-19
-- Version: A --
============================
- IRD2 PMKs now included in key.bin
Does anyone know what this means, "IRD2 PMK's" are they pulling pmks from ird2 cards ?
Look Here -> |
which provider are you targetting?
Wasnt thinking of any provider, was just checking updates for hummy and noticed irdeto-2 and pmk, so they can pull details from ird-2 cards
Hi Jaz
TOH have been doing this for at least 6mths now!!!!!
the ird2 pmk's were initially embedded within one of the modules contained within the TOH HDF file and so could not read or easily extracted.....but for some reason they, TOH, removed the pmk's from this particular module and placed them within the key.bin file in one of the fields not used when you open the emu key loader.
"Irdeto2 PMK's for the Sexview and FreeX bouquets have been in the public domain for quite a while.
In HoT10.8 and 10.9 these keys were being stored within the Emulator module of the ToH and were thus not viewable.
This meant that every time the PMK's changed, a new ToH was required. The decision was thus taken to shift the PMK's back to the Ram Editor into key slots not being used for other purposes.
"Although only the Sexview PMK's are included in the latest key.bin file (see Irdeto Provider No.5 within the key.bin file), provision has been made for the FreeX PMK's to be added as and when a new set are released to the public domain.
No the ToH will not work on any bouquets from that neck of the woods.
Even if the PMK's were known, a currently unused Irdeto Provider number within the Ram Editor would have to allocated to that Provider.
The correct PMK's and Provider ID would then have to be inserted in nominated key slots within that Provider Number. The ToH would then have to have an instruction written into it to look for the PMK's in the nominated key slots.
I suspect that the number of people who have access to the Irdeto2 algorithm crack is very limited and probably does not include members of the ToH / HoT team."
so, i think to answer your question....these pmk's are for Euro providers! and have been advised they will not work for our neck of the woods, but I haven't had time to test this theory yet!!!! i guess anything is worth a try
Ok makes sense now, TOH didnt extract the pmk, some one else did and made it public
Humax ToH3.4 HoTplugged v11.0 - 2008-04-19
-- Version: A --
============================
- IRD2 PMKs now included in key.bin
[HowTo]
FreeX IRD ProvID No 4 (IRD2 down!)
SexView IRD ProvID No 5
LA7 IRD ProvID No 6
for AU you need:
Plain Mode:
ProvID
PMK0 stored in Key 0C/0D
PMK1 stored in Key 0E/0F
crypted Mode:
ProvId must be 000000
crypted ProvID is stored in Key 0A
crypted PMK0 is stored in Key 0C/0D
crypted PMK1 is stored in Key 0E/0F
[/HowTo]
for SexView include the following keys on IRD ProvID No 5
ProvId must be 000000
0A: 9A9710B669C68128
0C: DFE674F4867E83A1
0D: A30C02595880CCB3
0E: 4973A94D01179DB0
0F: 71F3D8943CA5757B
anyway of running ird1 aurora keys with this loader? if so anyone know how? I have looked at it and there is nowhere to put prov10 ID's or PMK's anywhere is there a way around this? how can I get ahold of ToH crew maybe we can just give them the EMK log with ProvID's and PMK's for them to put in there loader software so we know how to do it next time.
---------------------------------------------------
3 x 90CM Hills Offset, 1.2M Aluminium Offset, 1.2M Offset,
1.7M Offset.
LOL probably.
is there a way to put ird1 keys on with the loader for aurora? I havn't yet tried but there is no setting for provID10 and PMK10 in the loader only 00
---------------------------------------------------
3 x 90CM Hills Offset, 1.2M Aluminium Offset, 1.2M Offset,
1.7M Offset.
There are two forums, which specialize in Humax receivers.
Read, mark, learn and inwardly digest the abundant information to be found at and .
There are also numerous other European forums where you will find information.
Use Google. Do some research and learn, learn. learn as others have had to do.
so it can be done? I am not wasting my time? well I am really as a card is much easier but its another challenge
---------------------------------------------------
3 x 90CM Hills Offset, 1.2M Aluminium Offset, 1.2M Offset,
1.7M Offset.
nowhere about adding Aurora ird1 keys. why do people keep sending me places that dont help me. I had already gone to those sites and no luck the only program I found for loading keys was the loader and it doesn't have a ProvID10 option. all I ask is can it be done for ProvID10 thats all I want to know not where to read what I have already read.
---------------------------------------------------
3 x 90CM Hills Offset, 1.2M Aluminium Offset, 1.2M Offset,
1.7M Offset.
evilbrian (09-08-11)
fine dont then
---------------------------------------------------
3 x 90CM Hills Offset, 1.2M Aluminium Offset, 1.2M Offset,
1.7M Offset.
The reason for the comments is you've been given links to sites with all the answers but you persist on being spoon fed. Do some reading.
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
MAtt even if you cannot get it working its not a waste of time. You may learn how to do other things.
After all satellite tv hacking is a hobby of yours right? You prefer to hack and not have to pay?
If you are in a hurry then buy a card. It you have lots of spare hours then try softcam means or UCAS. Too bad UCASCITY went offline as that had lots of posts on what you wanted to learn.
Some receivers which can CS still come with UCAS inbuilt
I have real cards I like the challenge. all I wanted to know was if it can be done? as I have read both those sites before you even posted them and I can only work out ProvID00 not 10 thats all
---------------------------------------------------
3 x 90CM Hills Offset, 1.2M Aluminium Offset, 1.2M Offset,
1.7M Offset.
I think he meant the two sites linked in post #10
Bookmarks