Replacing Slot 1

[peter1929]

Hi all any one able to supply or advise where i can purchase a new slot 1 for the ds lite and daughters has bent some pins ?

[myclock]

there are a lot of new slot 1 solutions out at the moment. good cheap cards such as EDGE, DSTT / TopToy DS, N5, R6 etc. all relatively cheap and do the job fine

[peter1929]

are you talking about the socket that is soldered to the main board? thats what i am after.

[ozchips]

how bad are the pins ?
I have seen quite a few with bent pins due to kids being very rough
your best bet is to take the bugger apart and see if you can straighten them out , also with some fine emery paper , give them a good going voer at the same time . Unless you have broken pins , there should be no need to replace it mate

[Pat123]

If you can't fix it have the dstt and the ace kard 2 for around 35-40 with 2gb cards (free shipping too).

[ozchips]

pat he is talking about the DS itself , not bent pins on a game cart , the internal pins of slot 1 of the DS
it is a bit of a common problem
oh yeah had to edit your post as well pat , no links to shops mate

[Pat123]

pat he is talking about the DS itself , not bent pins on a game cart , the internal pins of slot 1 of the DS
it is a bit of a common problem
oh yeah had to edit your post as well pat , no links to shops mate

Oh yeah, my bad.
The information is still quite relevant as it is in the nintendo forum and dx have the best prices.