It's been a long time since I played with these but I don't think you can reanimate a v1.9 card .. it's pretty much stuffed.
I could be wrong though, as I said it's been a long time.
I have fnally managed to kill a 1.9 card but if I try to use the 1.6 fix/clone option in FMcard it only has 1.2 and 1.6 card script generation. I have tried 1.6 on a 1.8 card and all t does is programs the real card ascii serial number and nothing else what if antyhing can I use to fix/clone a 1.9 card an get it to program the HSN, HMK, etc so I can script the rest of the info? asithas no HMK you cant put a PMK hence no script is able to be made to set the ProvID,PMK and CoCo it un useable I ashume the 1.9 isthe same as the 1.8 I have a screwed oficial Aurora 1.8 card I needto kil and bring back to life with orinigal details but no luck also my MOSC 1.6 comes up invalid card in a CAM jet works in all other boxes yet all 1.2's made from same card work. is there a chance my CAM doesn't work with 1.6 cards?
---------------------------------------------------
3 x 90CM Hills Offset, 1.2M Aluminium Offset, 1.2M Offset,
1.7M Offset.
Look Here -> |
It's been a long time since I played with these but I don't think you can reanimate a v1.9 card .. it's pretty much stuffed.
I could be wrong though, as I said it's been a long time.
why can you kill/reanimate to blank like 1.2's and 1.6's then? and as for when there produced they come out the same and the info is put on later. card now comes up in FMcard in the Protected part as no instead of yes like any programmed ones do. I have managed to kill another I will just have to give it a go. someone on here said they killed and reanimated 1.8 cards and got them working. I cant get then to work only the ascii serial get written. maybe I just need to give it a go its just the later the card version the harder they are to kill. I have no problems with 1.2 (ofcourse) and 1.6 its just the 1.8/1.9 that strictly reqyire a signature to change anything on. I get my 1.9's to work with aurora by setting the provID and by spoofing the PMK by using the HMK from the card and a working PMK and calculating a fake EMK to send to the card to set a valid PMK but after a rollover they stop working. if I could just kill some more 1.9's I would be happy to destroy one I have 16 more only doing this for the challenge no other reason I dont need 29 MOSC's but I do rather use them than gold as the channel change is much faster and real irdeto cards dont seen to ware out I especiall like 1.6's as you can extract PMK's without EMK. dose anyone else have any suggestions?
---------------------------------------------------
3 x 90CM Hills Offset, 1.2M Aluminium Offset, 1.2M Offset,
1.7M Offset.
Try putting your details on a silver card or funcard. They seem to last alot longer (some goldies seem to die quickly) and channel changes are faster.
Blown Humax 5400Z, Strong SRT 4658X, Strong 4663X and DM 518.
yeah but I want to MOSC even if I dont use them. and getting silver cards now are very hard. I have 8 working MOSCs so ont need any more all 1.2 and 1.6 and 2 official aurora cards v1.8 and 1.9 but want to MOSC 1.8's and 1.9's I tried the 1.6 script on 1.8's and 1.9's that took me ages to kill and to only put ascii serial on it no HSN or HMK so I cant put provID,PMK or CoCo on it is there any other fix/clone script software besides FMcard? checked cardwizard that kills them but it has no option strangely unless I am missing it
---------------------------------------------------
3 x 90CM Hills Offset, 1.2M Aluminium Offset, 1.2M Offset,
1.7M Offset.
where is my tinfoil hat?
When you connect to it via fmcard, is it zero'ed. ie, all the fields have zeros in them?
enf
The fact that there's a highway to hell and a stairway to heaven says a lot about the anticipated traffic flow.
yes that is correct
---------------------------------------------------
3 x 90CM Hills Offset, 1.2M Aluminium Offset, 1.2M Offset,
1.7M Offset.
---------------------------------------------------
3 x 90CM Hills Offset, 1.2M Aluminium Offset, 1.2M Offset,
1.7M Offset.
After its killed and reanimated it should have zeros in all the fields IIRC. Find a program called cardwizard and connect to it with that. Try the reanimation in the program...
The card should have zeros in all fields when done correctly. I'll upload a doco and proggie to reprogram it later when I have a chance...
Cheers
enf
The fact that there's a highway to hell and a stairway to heaven says a lot about the anticipated traffic flow.
thanks mate.
---------------------------------------------------
3 x 90CM Hills Offset, 1.2M Aluminium Offset, 1.2M Offset,
1.7M Offset.
How to reprogram killed/reanimated ACS1.2-1.9 cards using Cardblaster..
Cheers
enf
The fact that there's a highway to hell and a stairway to heaven says a lot about the anticipated traffic flow.
I will give it a go and let you know how it goes. thanks. managed to kill 2 more 1.9's today was just lucky I guess.
---------------------------------------------------
3 x 90CM Hills Offset, 1.2M Aluminium Offset, 1.2M Offset,
1.7M Offset.
ok all worked except I cant get it to change the ProvID I have done it heaps of time before HMK, PMK, HSN is fine and created sig and it says its worked ok but doesn't change. any idea?.
EDIT
-----------------------------------------------------------------
Ummmm with a non killed/reanimated card you can use FMcard and create a signature well with cardblaster you must use cardblaster to make a completely different script to do this. so it now works. thanks everyone. much appreciated. I will be able to sleep now well unless I try to sit up and kill 17 more cards LOL once killed there staying killed unless I need them going to start with my faulty official aurora cards that died due to to much playing.
Last edited by DJmatt; 19-07-11 at 11:06 PM.
---------------------------------------------------
3 x 90CM Hills Offset, 1.2M Aluminium Offset, 1.2M Offset,
1.7M Offset.
All you need is a valid HMK/HSN, which you say you already have, so just make a 280D and write it to the card, ProvID and PMK will be filled in automatically. Don't forget you need to calculate the signature on the 1.9.
enf (21-07-11)
done all that and all done. thanks
---------------------------------------------------
3 x 90CM Hills Offset, 1.2M Aluminium Offset, 1.2M Offset,
1.7M Offset.
Bookmarks