Reply With QuoteFrom what I've heard it seems it the card that determines the HSN but no idea how it's done. I thought if the card doesn't give a valid HSN then it can't be used with that bin but another might be ok.
Gamma loader 4.6 can be downloaded from
Leroy
EMK 4.8 gamma loader
Can someone please point me to the download site, have been looking for a week and can't find it.
Another question, if I have an EMK loader (3.1, 3.5 or 4.4) and a bin file with a number of HSN's, can I modify either or both to select 1 particular HSN when programming.
I have explored the bin file, but it is encrypted, so I cann't remove the unwanted HSN's.
And beer4life please be suttle, I'm just experimenting and learning.
| Look Here -> |
From what I've heard it seems it the card that determines the HSN but no idea how it's done. I thought if the card doesn't give a valid HSN then it can't be used with that bin but another might be ok.
Gamma loader 4.6 can be downloaded from
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
Digivic (08-08-11)
I thought that too, but the Aust@r bins give 1 HSN for all cards, so you can force 1 HSN to the card, please correct me if I'm wrong.Originally Posted by LeroyPatrol
I found this EMK loader, apparently it loads rdc files, I don't have a red dragon card and updates emm, so I can't test it, so if someone has a red dragon card please give me feedback.
to load rdc files there is a 'dragon loader'. It was posted on the dragon site a while back.
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
I have the loader 1.1, but you can't update the EMM with that loader, with this one apparently you can.
With the one Leroy posted is good for sending logged strings to cards
log your cards HSN with IRD_LogExtract or something similar
and then add the EMK to the Gup program and hit reset and then paste emk into the logged data to send to card box and hit send
Uploaded with
Last edited by best4less; 07-09-11 at 04:09 PM.
When you do things right, people won't be sure that you have done anything at all
LeroyPatrol (07-09-11)
Hey best , whats the C8 button for ?
I asked that same question all excited also LOL and i a sure he said something about the old gamma cards or something but was no use to us nowLOL
When you do things right, people won't be sure that you have done anything at all
HI Best is there any chance you could upload that version with c8 button,,,,thanks wazzaWith the one Leroy posted is good for sending logged strings to cards
log your cards HSN with IRD_LogExtract or something similar
and then add the EMK to the Gup program and hit reset and then paste emk into the logged data to send to card box and hit send
Uploaded with
wazza811 It's just a screen shot someone else sent mate sorry LOL
When you do things right, people won't be sure that you have done anything at all
c8 button
The C8 button is another way of updating the card. save your hsn logs in notepad.then use the c8 button to update it.
OSIRUS (01-10-11)
Posting Permissions
Bookmarks