Oscam/CCcam problems

[mydreambox]

Hi was running a Newcs server previously with CCcam clients. Have now changed the server to Oscam. Oscam server is working well but cannot get it to share to clients.

oscam.conf

[global]
nice = -1
WaitForCards = 1

#pidfile = /var/run/oscam.pid
#logfile = /var/log/oscam/oscam.log
#usrfile = /var/log/oscam/oscamuser.log
#cwlogdir = /var/log/oscam/cw
#showecmdw = 1

[monitor]
port = 988
aulow = 120
monlevel = 1
nocrypt = 127.0.0.1,192.168.1.1-192.168.1.255
monlevel = 4

[newcamd]
key = 01 02 03 04 05 06 07 08 09 10 11 12 13 14
port = 47690@090B:000000

[radegast]
port = 10004
user = user1
allowed = 192.168.1.1-192.168.1.255

oscam.server

# serial reader

[reader]
label = reader1
protocol = mouse
detect = CD
device = /dev/ttyS0
group = 1
emmcache = 1,3,2
caid = 090b
cardmhz = 357
mhz = 780

oscam.user



[account]
user = aaaaaa
pwd = 123456
uniq = 0
monlevel = 1
group = 1
au = reader1
caid = 090b

[account]
user = xxxxxx
pwd = 123456
uniq = 0
monlevel = 1
group = 1
au = reader1
caid = 090b

cccam.conf
N: 192.168.1.20 47690 aaaaaa 123456 01 02 03 04 05 06 07 08 09 10 11 12 13 14 1

Any suggestions would be appreciated

[johnwinger]

change the caid value to be all 090B or 090b in all of your config.

caid = 090b

Also you might need to add the following line to oscam.user on each account.

ident = 096B:000000

You can access your web interface and see that it is reading the card ok?

I am not the best with your type of card.

[mydreambox]

make the change no difference, thanks for your input

[slippery49]

Only going from memory, dont have one of these cards but dont you need the boxkey?

[LeroyPatrol]

Only going from memory, dont have one of these cards but dont you need the boxkey?

Boxkey was only for orange foxtel cards.....may they RIP

Leroy

[checkitout]

cccam.conf
N: 192.168.1.20 47690 aaaaaa 123456 01 02 03 04 05 06 07 08 09 10 11 12 13 14 1

Any suggestions would be appreciated

If your DES key is what you have posted ...you have an extra "1" ... may be it is a typo

[mydreambox]

Card is a Bluey.

Server is working perfectly, it the clients I cannot get working.

Client below
Card Info
CCcam SmartCard information
Welcome to the CCcam information client
card reader /dev/sci0
no or unknown card inserted

Seems it cannot find the card reader. Where should these detail be located. Do I need to point it to the card reader somewhere?

Sorry really lost and the more I read the more confused I become. Lots of different methods but I cannot seem to get any to work. I'm certain it a very simple solution I am missing. Usually is lol.

[slippery49]

you have the client cam file named ccca,conf, should be cccam.cfg,

have you tried a diff cam like mgcamd

[Kavakid]

[newcamd]
port = 47690@090B:000000
#needs server ip here
key = 01 02 03 04 05 06 07 08 09 10 11 12 13 14

cardmhz = 357
mhz = 780

change the mhz = 357 or both to 600.

780 is overclock setting for smargo reader