7 simple steps to update your device with the latest v875 map

[eegoos]

Shouldn’t be a problem mate, I’ve just updated a couple of tomtoms. updated new maps on one sd card then simply copied the contents of that to another sd card to use in another unit. Only thing I had to do was delete the ttgo.bif file then start up the unit so it creates its own ttgo.bif file then run the fastactive and jobs a good’un.

yeah, you rite mate
i already use that maps for 3days
nice thread it is

btw, i still got lost yesterday >.<
are there any newest map for melbourne mate??
thx

[ins8ired]

Hey lemonfish,
the via 1435 has a micro sd card slot at the bottom of the gps unit. not sure, but is there some way to install maps on the card instead? Not sure if it will work for i may need to load a whole new navcore on the card. Thanks.

[petersh1]

Thank you! Thank you! Thank you!

[bluegrass]

Thanks !
FWIW, the Fast Activate 3rd procedure would not work when my memory card was in the (Chinese) PDA, as there does nor seem to be a drive letter for it.
When I used a card reader instead, it worked fine.
I did not bother with TTHome as I never use it anyway.

[dirtyfunblokes]

Hey thank you very much for this post. I followed your instructions and now my Tom Tom works great again. I really appreciate your help.

[iaaan]

great job in updating maps
but I dont have speed cameras on my gps
did all 4 things that i was supposed to do and all worked but no speed cameras or red light cameras.
any suggestions
thanks

[lemonfish]

great job in updating maps
but I dont have speed cameras on my gps
did all 4 things that i was supposed to do and all worked but no speed cameras or red light cameras.
any suggestions
thanks

1) Download the latest speed cameras from the thread. Go to the latest posts for the latest updates.

2) Extract the downloaded zip or rar file. Once extracted, you will then see 2 files

3) Copy across the 2 files and paste them into the map folder. Overwrite any common files if prompted

4) Run FastActivate Premium (the latest version) and click on the 2nd button, making sure you wait until it has completed

5) Confirm that a Safety_Cam_AU_TomTom.ov2.dct file is created in the map folder

6) Reboot. Done

[iaaan]

Cant get the speed cameras to work
downloaded the four steps and maps work perfectly but have no speed cameras

[lemonfish]

They are there.

If the new .dct file was created for the speed cameras, then they are present in your map. Do a demo of a route where there are known cameras to test, or even take it for a test drive.

[iaaan]

will try shortly
thanks for the quick reply

[iaaan]

Works perfectly
thanks for the help

[acem8]

They are there.

If the new .dct file was created for the speed cameras, then they are present in your map. Do a demo of a route where there are known cameras to test, or even take it for a test drive.

Hi Lemonfish, thanks for the great work.

Should the cameras show up as a POI category? When I used to do this years ago for my very first TOMTOM GO they did and you could assign different warnings and .bmp files depending on the speed limit.

I have updated to the latest map, I am working off 9.061, the .dct file for the speed cameras has been created (only 1KB though). Is the only way to know they are working to go for a drive?

[lemonfish]

Hi Lemonfish, thanks for the great work.

Should the cameras show up as a POI category? When I used to do this years ago for my very first TOMTOM GO they did and you could assign different warnings and .bmp files depending on the speed limit.

I have updated to the latest map, I am working off 9.061, the .dct file for the speed cameras has been created (only 1KB though). Is the only way to know they are working to go for a drive?

The official speed cameras are not POI. They are a service.

You can assign a different sound by going into the Safety Alert settings found in the menu under "TomTom Live Services" or similar.

You don't need to go for a drive to test the cameras. Prepare a demo route at 100% speed and the cameras should show up only a few seconds before approaching them.

[Biggun]

Thanks for the great guide, but after doing everything as per guide, when Tom Tom starts it just hangs on the Tom Tom screen. Any ideas?
Thanks

[hashoom]

trying to activate keep getting downloading meta file please wait and nothing happens

[lemonfish]

trying to activate keep getting downloading meta file please wait and nothing happens

Try the latest version 1.8.8.0 which includes the latest meta, so doesn't need updating.

[eegoos]

hi there lemonfish

just wondering, wheter there are any new map for tomtom one??

thx

[lemonfish]

hi there lemonfish

just wondering, wheter there are any new map for tomtom one??

thx

The 3 current Australia v880 maps are as follows:

1) - full IQ & ALG map which requires navcore version 8.2xx or higher

2) - basic map with no IQ or ALG

3) - IQ & ALG but no ASR - usually used on TomTom Carminat devices (built-in car navigation) - also requires navcore version 8.2xx or higher

For your TomTom ONE, if you use the official navcore, then only the basic 880.3811 map will work on your device.

[eegoos]

The 3 current Australia v880 maps are as follows:

1) - full IQ & ALG map which requires navcore version 8.2xx or higher

2) - basic map with no IQ or ALG

3) - IQ & ALG but no ASR - usually used on TomTom Carminat devices (built-in car navigation) - also requires navcore version 8.2xx or higher

For your TomTom ONE, if you use the official navcore, then only the basic 880.3811 map will work on your device.

emm well
i just saw my gps version info
app 7.903
os:2344
and im using map 875.3615

its for tomtom one

whats ur suggestion for the newest and compatible map?
can i upgrade the navcore?

about:
"For your TomTom ONE, if you use the official navcore, then only the basic 880.3811 map will work on your device."
where can i download the map?

thank you very much mate

[lemonfish]

emm well
i just saw my gps version info
app 7.903
os:2344
its for tomtom one

whats ur suggestion for the newest and compatible map?
can i upgrade the navcore?

thx mate

The latest 880.3811 map is for your official navcore.

7.903 is the latest official navcore for your device.

You can use an SE navcore of your choice, such as 8.562