As you are aware I'm not in Melb but NE Vic and I can get HD TP's with my Az.
Leroy
Hi,guys I have an Azbox premium+ hd receiver and I have been trying to lock on the HD channels on Measat 3.
I live in Melbourne and have a 2.3m dish.
I can lock onto some of the the dvb-s transponders say:3705H 4288 3/4
but cannot lock onto the HD dvb-s2 services even though I have a 50% quality level.
I cannot test this with another HD receiver.
Can anyone confirm that its possible to receive these transponders in Melbourne?
Thanks
Look Here -> |
As you are aware I'm not in Melb but NE Vic and I can get HD TP's with my Az.
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
Are you running factory firmware?
If you get a chance lock on one transponder and can you note the quality level.
I had read somewhere that you need a much greater signal level to lock on a dvb-s2/8psk transponder than a dvb-s.
I'm running factory firmware. I just picked a random TP and 3813V 6659 DVB-S2/8PSK Fec 2/3 Pilot-1. Signal strength is 74% and Quality is 45%
Cheers,
Leroy
XCRUISER HDSR600HD twin sat and terrestrial receiver $OOS *
XCRUISER HDSR385 Avant - sold out$OOS UltraPlus DVB-T and DVB-S2 tuners $49 Remotes $OOS
Thanks Leroy.I have enigma2 firmware and maybe there is a bug.
I have a usb with factory firmware but when I load it it wont lock onto the transponders.
What firmware version do you have?
Bookmarks