hmm strange they work directly downloaded fromnot sure whats up with the links though.Code:http://archive.vuplus.com/download/drivers/beta/
looks like Vu may have found a bug and pulled the links
to use these drivers open the relevant archive using winrar
now navigate to
on your boxlib/modules/2.6.18-**/extra
backup the files in this folder first then overwrite them with the ones that you download, there should be four files in total.
20110929
- improve DVB-C/T tuning(uno)
- Fix incorrect display of DVB-C/T SNR/AGC(uno)
- Fix high-bitrate problem in CI(uno, needs a FPGA update, New Rev 4.1 FPGA image is at )
- Support 3D framebuffer
- Add interface for UI position setup
- Add redundant fpga device at /dev (uno)
- Add ioctl cmd for hdmi_cec(get physical/logical addr.)
- Fix audo mute in pass-through(uno)
- Add interface to set the system code of the remote control(uno)
- Add interface to disable REC VFD icon(uno,duo)
Uno
DuoCode:http://archive.vuplus.com/download/drivers/beta/vuplus-dvb-modules-vuuno-2.6.18-7.3-4.4.3-20110929.tar.gz
SoloCode:http://archive.vuplus.com/download/drivers/beta/vuplus-dvb-modules-bm750-2.6.18-7.3-4.4.3-20110929.tar.gz
UltimoCode:http://archive.vuplus.com/download/drivers/beta/vuplus-dvb-modules-vusolo-2.6.18-7.3-4.4.3-20110929.tar.gz
Code:http://archive.vuplus.com/download/drivers/beta/vuplus-dvb-modules-vuultimo-2.6.18-7.3-4.4.3-20110929.tar.gz
Look Here -> |
hmm strange they work directly downloaded fromnot sure whats up with the links though.Code:http://archive.vuplus.com/download/drivers/beta/
looks like Vu may have found a bug and pulled the links
Last edited by DUDE; 29-09-11 at 06:12 PM.
warbo (15-10-11)
Strangely any driver releases after bm750-2.6.18-7.3-4.4.3-20110817.tar.gz cause my vu+duo to hang on boot.
Fortunately I can still get ftp access and replace them and it will work again. I'm using VIX 2.2.
Last edited by warbo; 15-10-11 at 08:10 AM.
Thanks Vic. You'd be right about that. I'd forgotten about 2.1. I tried it the other day and didn't like it, so went back to VIX.
VIX 3 will be out very soon based on pli 2.1 so I'll just wait for that.
sorry fellas it's been a while since i visited thers here parts.
any way those drivers are now quite old and were buggy hence why they were pulled.
when installing beta drivers a good idea is to start a telnet session before rebooting and issue the following commandthen reboot once done.depmod -a
as for the bootloader, it adds no functionality what so ever, other than allowing the receiver to use larger images than 64 meg.
ViX 2.3 will be along as soon as were happy to release it at present were upto 78 revisions of that image and still going. hopefully it wont be too long now. as for ViX 3.0 thats not even a twinkle in andy eye yet.
Bookmarks