Reply With QuoteHunt around for a few firmwares unitl you get one that works for your box
Strong 4653X
Seem to be having problems with my Strong 4653x.
Every week on a Wednesday @ 10am it goes "scrambled channel".
So to fix it I have to load 1.52P firmware. Wait for channels to load, then go back to 1.17 for a stable picture.
Now it has to be the box. Its not accepting the updates (whatever they are called (HSN....) meh).
Is there a way to fix this problem permanently, by either using a different/better firmware version.
Cheers.
| Look Here -> |
Hunt around for a few firmwares unitl you get one that works for your box
the african firmware works if a few box's
updates ect ok just need to change a few settings
Methinks the answer lies here:Originally Posted by under-
SatGuRu
Senior Member
SatGuRu's Avatar
iTrader: (1)
Join Date: Jan 2008
Location: Australia
Posts: 382
SatGuRu is on a distinguished road
Default
Sometimes if you go back in firmware you have to use the "fixer" after you load the previous firmware.
Here:
RapidShare: 1-Click Webhosting
Kindest Regards, " The Druid ".
Last edited by beer4life; 22-05-08 at 11:50 PM. Reason: Link.
has anybody used the 1.52P firmware ,then used the FIX_20070910, then the1.17 firmware. and was everything ok ?
Looks like you did your homework
When you do things right, people won't be sure that you have done anything at all
you can go 1.17 to 1.52p and back without the fix
but you can load the 1.12 african firmware from the strong site
and card will update and kickstart
i notice today in the strong website the 4653x firmware 1.17 is dated 20/5/2008 where as the other one before that was dated 16/04/2008 does this mean it its been fixed and will update now ? for example did anybody lose channels today if they had updated their firmware from 20/05/2008
only heard good things
When you do things right, people won't be sure that you have done anything at all
Posting Permissions
Bookmarks