Reply With QuoteIts a version 18. The Modbo 745 will work on it. Not sure of the other chips out there, but I wouldnt be too surprised to find that most of the chips which work on the 79002 would work on them.
Which chip for SCPH-90002
Bought a new PS2 and just wondering which version is it and what chip to buy. Can anyone help please. Thanks.
Model number is SCPH-90002
| Look Here -> |
Its a version 18. The Modbo 745 will work on it. Not sure of the other chips out there, but I wouldnt be too surprised to find that most of the chips which work on the 79002 would work on them.
What would you do if your server was stolen or failed beyond repair?
http://www.2000cn.com.au/shadowprotect.html
Try this one
ishkhan
Thanks for the replies guys. Also any of this chips need laser protection mod for 90002?
Shouldnt need it mate, but thats probably best answered in a few months time, much like most other new models, it takes a while to work out if there is any problems with them.
What would you do if your server was stolen or failed beyond repair?
http://www.2000cn.com.au/shadowprotect.html
Can confirm Modbo4 v1.93 works ok
PrecisionMods
If you want it done get LJAY to do it. He's the best in Sydney.Originally Posted by Ljay
Can confirm Modbo4 v1.93 works ok
Has anyone tried the duo modchip? Looks like the new PS2's have the power supply inbuilt. Could'nt find the proper location for the 3.3V for the modchip. The diagrams show a fuse, but the one I have has a resistor in place.
LOL at recommendation from a colostomy bag.....pmsl...sorry Ljay...lol
yep Modbo 4.0 works fine.
I can't seem to get it to work. Did you end up connecting CX? And what is the F point they refer to on the diagram?Can confirm Modbo4 v1.93 works ok
yes use CX but not F.....dont think there is an official Modbo4 diagram, but u can use other ones....points in same location
PrecisionMods
Duo 3 Ultra tested and working 100% on 90002..Just dont use there instructions because they are wrong.. use your head and work out were they go..
tony@ipbv.net
aious.com.au
I normally follow the diagram.
I don't think I can use my head to work out where the go as I wouldn't have a clue which point is for what.
Has anyone tried the Modbo 4.0 with the V1.99 firmware on it, Have had no luck so far with this chip with the 1.99 firmware in this model, Have found the chip to be bullet proof in other models but been over and over my instal and it seems good but cant get it too work in this one, Might be me? Anyone else having dramas?Can confirm Modbo4 v1.93 works ok
Sorry mate, did one with a 1.93 one yesterday no probs. Dont have any 1.99 ones to try for you though.
What would you do if your server was stolen or failed beyond repair?
http://www.2000cn.com.au/shadowprotect.html
seems to work ok here polarbear , might have a dud chip there mate
I am not sure of this but I had some clone modbo4.0 which had 1.99 in them, the original modbo have 1.93. I not sure if this has anything to do with it though. I have only done a few 90002 and they have all been with 1.93 originals. BTW I have never had any problems with the 1.99 but I do not stock them any more.
Thanks for your help guys - Much appreciated. Oz were the chips you used (or using) for this model have the 1.93 or 1.99 firmware on them? Thanks mate.
will check and get back to you mate
No problems - Thank you Sir, Like your new sig by the way. Kinda reminds me what the teachers did with the Playboy mags they confiscated when I was a kid at school - LOL !!
Posting Permissions
Bookmarks